VCR REPAIR TIPS PAGE 5

MAKE	MODEL	CHASSIS	SYMPTOM	CURE
PANASONIC	PV1220	N/A	NO AUDIO FROM PLAY BACK OF SELF RECORDED TAPE	CHECK FOR 1KHZ SINEWAVE--RFEPL. C4029
PANASONIC	PV1220	N/A	POWERS UP OK WILL NOT EJECT LOADING MOTORWONTENG	CHECK R1007
PANASONIC	PV1220	N/A	SPEED JUMPS BACK & FORTH FROM SLP TO SP ON PB	CHECK FOR PROPER OPERATION OF THE AUDIO CONTROL HEAD
PANASONIC	PV1220	N/A	UNIT GOES FROM PLAY TO PAUSE AFTER REPLACING IC4	CHECK FOIL CONNECTION AROUND IC4
PANASONIC	PV1220	N/A	SWIT. REVIEW,CUE/PAUSE DURING PLAY MODE	VOLTAGE LOW AT THE COLLECTOR OF Q6021 CHECK C6012
PANASONIC	PV1220	N/A	THIN WHITE HORINZ. LINE THUR PICTURE	CLEAN UNDER UPPER CYLND.
PANASONIC	PV1220	N/A	PIX JITTERS ON SPECIAL EFFECTS	CHECK V-LOCK ADJUSTMENT-WORN HEADS-PG SHIFTERS TR.FIX
PANASONIC	PV1220	N/A	WILL NOT GO INTO OTR TIMER RECORD MODES ONLY	CLEAN OR REPLACE THE MODE SELECT SWITCH
PANASONIC	PV1220	N/A	UNIT STAYS IN VCR MODE WHEN POWERED UP	CHECK Q7021
PANASONIC	PV1220	N/A	WASHED OUT VIDEO ON PLAYBACK AND TUNER	CHECK/REPLACE C3052
PANASONIC	PV1220	N/A	NO COLOR IN PLAY BACK ONLY GOOD B&W	CHECK/REPLACE IC8002,LP00147
PANASONIC	PV1220	N/A	EATS TAPE WILL NOT REWIND CORRECTLY	VERIFY THE LOCK COLLAR SHAFT IS NOT BENT
PANASONIC	PV1220	N/A	TAPE DOOR WILL NOT CLOSE WITH TAPE INSERTED	TAPE FLAP DOOR OPENER HAS GOT BENT BACKWARDS.REPAIR.
PANASONIC	PV1220	N/A	NO CYLINDER CONTROL UNLOADS TAPE FROM POST	CHECK /REPLACE IC4
PANASONIC	PV1220	N/A	NO COLOR	ADJUST VCO,VXO--CHECK 3.58MHZ,4.2MHZ,629KHZ
PANASONIC	PV1220	N/A	UNIT INTM. SWITCHES BAck/FORTH FROM SLP SP	REPLACE IC2005
PANASONIC	PV1220	N/A	INTERMITTENT AUDIO QUAVER IN PLAYBACK	REPLACE IC2002
PANASONIC	PV1220	N/A	PLAY MODE ACTIVATED UNIT GOES INTO REVIEW	REPLACE FAST FORWARD IDLER UNIT
PANASONIC	PV1220	N/A	WILL NOT EJECT TAPE	CHECK DOOR SOLENOID
PANASONIC	PV1220	N/A	WILL NOT RECORD OR PLAYBACK AUDIO	CHECK/REPLACE IC4003
PANASONIC	PV1220	N/A	ERRATIC FUNCTIONS	CHECK/CLEAN/REPLACE MODE SELECT SWITCH
PANASONIC	PV1220	N/A	NUMBER 11 BAND SWITCH CHANGES ALL CHANNELS BELOW	D7311 MAY BE LEAKY OR BREAKING DOWN
PANASONIC	PV1220	N/A	EATS TAPE PLAY IDLER PROPERLY	REPLACE THE PLAY IDLER
PANASONIC	PV1220	N/A	GOES TO REVIEW WHEN PLACED IN PLAY	CHECK D6040 FOR SHORT TO GROUND
PANASONIC	PV1220	N/A	INTERMITTENT NO COLOR REPLACING UPPER CYLINDER	UPPER CYL. INSTALLED 180 DEGREES OUT OF PHASE
PANASONIC	PV1220	N/A	WON'T RECORD -- MANUAL OR OTR	CLEAN OR REPLACE ERASE PROTECT SWITCH
PANASONIC	PV1220	N/A	DEW SENSOR ON CONTINUOUSLY	CHECK AND REPLACE D6009
PANASONIC	PV1220	N/A	DD CYLINDER NOT ROTATING EJECT SOLENOID NOT WORK	CHECK FOR OPEN Q1004
PANASONIC	PV1220	N/A	FIP LIGHTS-UNIT SHUTS DOWN	CHECK IC6002
PANASONIC	PV1220	N/A	WHITE LINES FLASH IN VIDEO--STATIC IN AUDIO	REPLACE OR REPAIR DEMODULATOR MODULE
PANASONIC	PV1220	N/A	FIP FILAMENT VOLTAGE OK NO FIP DISPLAY	CHECK R6005 AND R6006
PANASONIC	PV1220	N/A	DIAGONAL LINES IN PIX OF SELF RECORDED TAPE	REPLACE C3023 SAME VALUE AS ONE REMOVED FROM BOARD
PANASONIC	PV1220	N/A	NO CAPSTAN OPERATION AFTER 1 TO 2 HOURS	CHECK FOR THERMAL BREAKDOWN OF IC2005
PANASONIC	PV1220	N/A	RECORDING INTERMITTENT WHEN IN TIMER MODE	CHECK OR REPLACE THE SAFETY TAB SWITCH
PANASONIC	PV1220	N/A	AUDIO TONE THRU TV ON PLAYBACK SP SPEED ONLY	CHECK OR REPLACE IC4003
PANASONIC	PV1340	N/A	NO FUNCTIONS--NO CLOCK--FUSE GOOD	CHECK FOR SHORTED D1007
PANASONIC	PV1340	N/A	TRACKING ADJUSTMENTS	MOST ACCURATELY PERFORMED IN SP MODE.
PANASONIC	PV1340	N/A	PIX JITTERS ON SPECIAL EFFECTS	CHECK V-LOCK ADJUSTMENT-WORN HEADS-PG SHIFTERS TR.FIX
PANASONIC	PV1340	N/A	DISTORTION OF CASSETTE TRAY SIDE PLATE	CHECK R6070 RC00043,PLOO144,IC6001
PANASONIC	PV1340	N/A	EXCESSIVE WOW AND FLUTTER	CHECK/REPLACE C2004 (BREAKING DOWN UNDER LOAD OR HIGH ESR)
PANASONIC	PV1340	N/A	NO COLOR	ADJUST VCO,VXO--CHECK 3.58MHZ,4.2MHZ,629KHZ
PANASONIC	PV1340	N/A	POWER SUPPLY TICKS WHEN PLUGGED IN AND ALL SECONDARY VOLTAGES ARE LOW.	CHECK R1002 (680k) FOR OPEN
PANASONIC	PV1340	N/A	NO TURNER RECEPTION	REPLACE R37 & IC7001 IF DEFECTIVE
PANASONIC	PV1340	N/A	NO COLOR ON PLAYBACK OF PRE-RECORDED TAPES	CHECK/REPLACE IC8101 (MN6163)
PANASONIC	PV1340	N/A	NO POWER FUSE OPENS IMMED. WHEN UNIT IS PLUG IN	CHECK /REPLACE D1001
PANASONIC	PV1340	N/A	WHEN PLAY IS PRESSED,VCR RUNS FOR 2-5 SECONDS THEN SHUTS OFF-NEVER SWITCHES FROM TUNER TO VCR-LOADING MOTOR RUNS ON	CHECK/REPLACE MODE SELECT SWITCH
PANASONIC	PV1340	N/A	NO FIP DISPLAY	CHECK 1015
PANASONIC	PV1340	N/A	INTERMITTENTLY STOPS PLAYING W/KNOWN GOOD TAPE	CHECK Q1552 (SUPPLY PHOTO XSTR)
PANASONIC	PV1340	N/A	CANNOT TUNE STATIONS,PLAYS TAPES OK.	IC7001 (AN5070) R7037
PANASONIC	PV1340	N/A	AFTER POWER IS APPLIED CAPSTAN SPINS FORFEW SECS	CHECK/ REPLACE Q6003 IN MICROPROCESSOR CIRCUIT
PANASONIC	PV1340	N/A	NO DISPLAY DD CYLINDER CONTINUOUSLY SPINNING	REPLACE D1008 IF SHORTED
PANASONIC	PV1340	N/A	POWER SUPPLY TICKS WHEN PLUGGED IN AND ALL SECONDARY VOLTAGES ARE LOW.	CHECK R1002 (680k) FOR OPEN
PANASONIC	PV1340	N/A	DEAD WITH OPEN FUSE	CHECK D1001,Q1001,R1003
PANASONIC	PV1340	N/A	WON'T POWER UP--DRUM RUNS CONTINUOUSLY	REPLACE IC6001 (MN15846VRG)
PANASONIC	PV1340	N/A	NO OPER.EXCEPT CLOCK-SHUTS OFF AFTER 15-20 SECS.	CHECK D1203,Q1203 (+12V UNSWITCHED VOLTAGE)
PANASONIC	PV1340	N/A	PUSH PLAY AND TAPE GOES TO REWIND	CHECK/REPLACE END SENSORS
PANASONIC	PV1340	N/A	WON'T RECORD -- MANUAL OR OTR	CLEAN OR REPLACE ERASE PROTECT SWITCH
PANASONIC	PV1340	N/A	WILL NOT RECORD WHEN TIMER IS SET	CHECK/CLEAN ERASE PROTECT SWITCH CONTACTS
PANASONIC	PV1340	N/A	CAPSTAN MOTOR RUNS ABOUT 8SEC. THEN SHUTS DOWN	CHECK R6070
PANASONIC	PV1340	N/A	STARTS PLAYING THEN STOPS;COUNTER DOESN'T WORK	CHECK IC1551
PANASONIC	PV1340	N/A	GARBLED AUDIO IN LP AND SLP	CHECK PINCH ROLLER,CLUTCH ASSY.;IDLER
PANASONIC	PV1361	N/A	DEAD	CHECK/REPLACE Q1001 AND IC1001
PANASONIC	PV1361	N/A	NO PICTURE THRU THE TUNER BUT PLAYS TAPE OK	CHECK/REPLACE IC7001
PANASONIC	PV1361	N/A	DEAD WITH OPEN FUSE	CHECK D1001,Q1001,R1003
PANASONIC	PV1361	N/A	PICTURE GETS DARKER OR LIGHTER ON PLAYBACK ONLY AND MAY ALSO LOSE COLOR	CHECK/RESOLDER GROUND CONNECTIONS ON R3122
PANASONIC	PV1361	N/A	CAPSTAN AND DRUM MOTORS WILL NOT RUN	CHECK FOR OPEN PR1 ON CAPSTAN/DRUM MOTOR DRIVE CBA
PANASONIC	PV1361	N/A	HORZ LINES-DRUM MOTOR RUNNING TOO FAST	REPLACE DD CYL. MOTOR
PANASONIC	PV1361	N/A	DRUM SERVO SPEED IS TOO FAST-SLOWING DRUM DOWN BY HAND WILL CAUSE A PICTURE TO APPEAR.	CHECK C2010 AND C2011 FOR LEAKAGE/OPEN/SHORT
PANASONIC	PV1361	N/A	NO DRUM/NO CAPSTAN	CHECK PR1 (CIRCUIT PROTECTOR) MOTOR DRIVE BOARD
PANASONIC	PV1361	N/A	LOADING MOTOR SLOW OR SLUGGISH	CHECK/REPLACE C1015 OR C1016
PANASONIC	PV1361	N/A	QUITS PLAYING & SQUELS FROM POWER SUPPLY	CHECK/REPLACE FILTER CAP C1006
PANASONIC	PV1361	N/A	GARBLED AUDIO IN LP AND SLP	CHECK PINCH ROLLER,CLUTCH ASSY.;IDLER
PANASONIC	PV1361	N/A	DEAD	CHECK/REPLACE D1014 AND D1010 (MAY CHECK GOOD)
PANASONIC	PV1361	N/A	DEW INDICATOR ILLUMINATES AND UNIT SHUTS DOWN	LOOSE CONNECTIONS ONTHE P3 PLUG
PANASONIC	PV1361	N/A	POOR CAPSTAN SPEED OR AUDIO QUIVER ON SP AND CAPSTAN PULSATES BACK AND FORTH ON LP AND SLP	CHECK/REPLACE C1015,C1016,C1018 AND C1019 IN POWER SUPPLY
PANASONIC	PV1361	N/A	NO AUDIO FROM TUNER-PLAYBACK AUDIO OK	REPL. IC4001
PANASONIC	PV1361	N/A	NO PICTURE DURING PLAYBACK-ONLY GREY SCREEN	CHECK/REPLACE C3009 FOR SHORT
PANASONIC	PV1361	N/A	NO FIP LOADING MOTOR ENGAGES OK	CHECK/REPLACE C1020 C1021 L1005
PANASONIC	PV1361	N/A	WON'T RECORD -- MANUAL OR OTR	CLEAN OR REPLACE ERASE PROTECT SWITCH
PANASONIC	PV1361	N/A	UNIT ACCEPTS TAPE BUT NO OTHER FUNCTIONS WILL WORK	CHECK/REPLACE LED SENSOR LAMP UNIT
PANASONIC	PV1361	N/A	COLOR FADES IN AND OUT	CHECK/REPLACE UPPER CYLINDER UNIT
PANASONIC	PV1361	N/A	TRACKING ADJUSTMENTS	MOST ACCURATELY PERFORMED IN SP MODE.
PANASONIC	PV1361	N/A	WOW & FLUTTER MOSTLY IN SLP SPEED	CHECK/REPLACE PINCH ROLLER
PANASONIC	PV1361	N/A	NO COLOR	ADJUST VCO,VXO--CHECK 3.58MHZ,4.2MHZ,629KHZ
PANASONIC	PV1361	N/A	RF RADIATION LINES IN PICTURE - GETS WORSE WHILE UNIT IS GOING INTO PLAY (WHEN MOTORS ARE RUNNING) BEFORE VCR MODE	CHECK/REPLACE C7,C9,C10,C14,C15,C16,C17,C18,C19,C23
PANASONIC	PV1361	N/A	PIX JITTERS ON SPECIAL EFFECTS	CHECK V-LOCK ADJUSTMENT-WORN HEADS-PG SHIFTERS TR.FIX
PANASONIC	PV1361	N/A	NO PLAYBACK VIDEO AND APPEARS THAT HEADS ARE DIRTY	CHECK/REPLACE C3003 FOR SHORT
PANASONIC	PV1361	N/A	VCR DOESN'T ERASE OLD AUDIO	CHECK/REPLACE C4023
PANASONIC	PV1363	N/A	WILL NOT LOAD CARRIAGE MOTOR OR TAPE TRANSPORT MOTOR - POWER SHUTS OFF AFTER 5 SECONDS	CHECK/REPLACE Q1203 FOR SHORT
PANASONIC	PV1363	N/A	POWER BUTTON INOPERATIVE AFTER WARM UP	CHECK/REPLACE R7639
PANASONIC	PV1363	N/A	INT. GOOD PIX. / SNOW IN PLAYBACK	CHECK IC2003
PANASONIC	PV1363	N/A	WOW & FLUTTER MOSTLY IN SLP SPEED	CHECK/REPLACE PINCH ROLLER
PANASONIC	PV1363	N/A	NO DRUM/NO CAPSTAN	CHECK PR1 (CIRCUIT PROTECTOR) MOTOR DRIVE BOARD
PANASONIC	PV1363	N/A	NO VIDEO - LOOKS LIKE A BAD VIDEO HEAD - AUDIO IS NORMAL	CHECK/REPLACE C3009 FOR SHORT
PANASONIC	PV1363	N/A	NO VIDEO IN TUNER MODE WITH RF INPUT AUDIO OK	CHECK D4401 OR D4052
PANASONIC	PV1363	N/A	POOR CAPSTAN SPEED OR AUDIO QUIVER ON SP AND CAPSTAN PULSATES BACK AND FORTH ON LP AND SLP	CHECK/REPLACE C1015,C1016,C1018 AND C1019 IN POWER SUPPLY
PANASONIC	PV1363	N/A	CASSETTE LOADS OK UNIT WILL NOT TURN ON	CHECK IC6001
PANASONIC	PV1363	N/A	TUNES CHANNELS MANUALLY BUT WON'T HOLD CHANNEL MEMORY	CHECK/REPLACE IC7603
PANASONIC	PV1363	N/A	NO AUDIO FROM TUNER-PLAYBACK AUDIO OK	REPL. IC4001
PANASONIC	PV1363	N/A	DEAD WITH OPEN FUSE	CHECK D1001,Q1001,R1003
PANASONIC	PV1363	N/A	CASSETTE LOADS OK DD CYLINDER STARTS	REPLACE IC2001
PANASONIC	PV1363	N/A	CAPSTAN AND DRUM MOTORS WILL NOT RUN	CHECK FOR OPEN PR1 ON CAPSTAN/DRUM MOTOR DRIVE CBA
PANASONIC	PV1363	N/A	HORZ LINES-DRUM MOTOR RUNNING TOO FAST	REPLACE DD CYL. MOTOR
PANASONIC	PV1363	N/A	DRUM SERVO SPEED IS TOO FAST-SLOWING DRUM DOWN BY HAND WILL CAUSE A PICTURE TO APPEAR.	CHECK C2010 AND C2011 FOR LEAKAGE/OPEN/SHORT
PANASONIC	PV1363	N/A	LOADING MOTOR SLOW OR SLUGGISH	CHECK/REPLACE C1015 OR C1016
PANASONIC	PV1363	N/A	QUITS PLAYING & SQUELS FROM POWER SUPPLY	CHECK/REPLACE FILTER CAP C1006
PANASONIC	PV1364	N/A	RF RADIATION LINES IN PICTURE - GETS WORSE WHILE UNIT IS GOING INTO PLAY (WHEN MOTORS ARE RUNNING) BEFORE VCR MODE	CHECK/REPLACE C7,C9,C10,C14,C15,C16,C17,C18,C19,C23
PANASONIC	PV1366	N/A	RF RADIATION LINES IN PICTURE - GETS WORSE WHILE UNIT IS GOING INTO PLAY (WHEN MOTORS ARE RUNNING) BEFORE VCR MODE	CHECK/REPLACE C7,C9,C10,C14,C15,C16,C17,C18,C19,C23
PANASONIC	PV1530	N/A	IN THE STOP MODE,RECORDING SPEED CANNOT BE SELECTED AND WHEN IN PLAY MODE FIP DISPLAYS LP MODE	CHECK/REPLACE IC4003 ALSO CHECK CONTINUITY OF SPEED SWITCH
PANASONIC	PV1530	N/A	NO RF OUTPUT RF CONVERTER OK	REPLACE IC701
PANASONIC	PV1530	N/A	GARBLED AUDIO IN LP AND SLP	CHECK IC4705,PINCH ROLLER,CLUTCH ASSY.;IDLER
PANASONIC	PV1530	N/A	NO COLOR	ADJUST VCO,VXO--CHECK 3.58MHZ,4.2MHZ,629KHZ
PANASONIC	PV1530	N/A	SWITCHES FROM STOP-PLAY-STOP BACK AND FORTH	CHECK/CLEAN MODE SELECT SWITCH
PANASONIC	PV1530	N/A	PIX JITTERS ON SPECIAL EFFECTS	CHECK V-LOCK ADJUSTMENT-WORN HEADS-PG SHIFTERS TR.FIX
PANASONIC	PV1530	N/A	FIP INDCATES PROPER MODE CAPSTAN FAILS TO RUN	CHECK Q2005
PANASONIC	PV1530	N/A	PLAYS HALF OF TAPE CAPSTAN DRIVE IC HOT	REPLACE CAPSTAN BEARING ASSEMBLY
PANASONIC	PV1530	N/A	WON'T RECORD -- MANUAL OR OTR	CLEAN OR REPLACE ERASE PROTECT SWITCH
PANASONIC	PV1530	N/A	DEAD WITH NO FIP DISPLAY	CHECK/REPLACE IC2005 AND R2087
PANASONIC	PV1530	N/A	ERRATIC FUNCTIONS--PLAY>STOP RESULTS PLAY>REWIND	CHECK FOR DIRTY MODE SELECT SWITCH OR SWITCH TIMING.
PANASONIC	PV1530	N/A	INCORRECT CAPSTAN SPEED	CHECK/REPLACE IC6001
PANASONIC	PV1530	N/A	POWER SHUTS OFF AFTER EJECTING TAPE	CHECK CASSETTE IN SWITCH
PANASONIC	PV1530	N/A	WILL NOT CHANGE CHANNELS WITH REMOTE	CHECK/REPLACE IC6003
PANASONIC	PV1530	N/A	WILL NOT CHANGE CHANNELS WITH REMOTE/DIRECTACCES	CHECK/REPLACE IC7001 & R7037
PANASONIC	PV1530	N/A	REWINDS DURING PLAY	CHECK OR REPLACE THE MICROPROCESSOR
PANASONIC	PV1530	N/A	CASSETTE LOAD/UNLOAD AND EJECT OK NO ATTEMPT RUN	CHECK/REPLACE THE SENSOR LED OR21013
PANASONIC	PV1530	N/A	CHANGES BACK & FORTH FROM PAUSE TO RECORD	REPLACE Q1013
PANASONIC	PV1530	N/A	ERRATIC COUNTER OPERATION	CHECK/CLEAN THE REFLECTIVE SURFACE ON BOTTOM SIDE OF TAKE UP REEL
PANASONIC	PV1530	N/A	TRACKING ADJUSTMENTS	MOST ACCURATELY PERFORMED IN SP MODE.
PANASONIC	PV1530	N/A	COMPLETELY DEAD	CHECK R1001,R1034,R1006 FOR OPEN CONDITIONS
PANASONIC	PV1530	N/A	UNIT LOADS TAPE DOES NOT MOVE	REPLACE IC2601
PANASONIC	PV1530	N/A	NO POWER NO DISPLAY FUSE OK	CHECK FOR DEFECTIVE Q3 AND D9 IN THE POWER SUPPLY
PANASONIC	PV1545	N/A	NO VIDEO - LOOKS LIKE A BAD VIDEO HEAD - AUDIO IS NORMAL	CHECK/REPLACE C3009 FOR SHORT
PANASONIC	PV1545	N/A	WARBLE IN THE AUDIO ON ALL SPEEDS AND SOME COLOR FLASHING IN/OUT	CHECK/REPLACE C1015,C1016,C1018 AND C1019 FOR OPEN
PANASONIC	PV1545	N/A	WILL NOT LOAD CARRIAGE MOTOR OR TAPE TRANSPORT MOTOR - POWER SHUTS OFF AFTER 5 SECONDS	CHECK/REPLACE Q1203 FOR SHORT
PANASONIC	PV1560	N/A	NO COLOR	ADJUST VCO,VXO--CHECK 3.58MHZ,4.2MHZ,629KHZ
PANASONIC	PV1560	N/A	WOW & FLUTTER MOSTLY IN SLP SPEED	CHECK/REPLACE PINCH ROLLER
PANASONIC	PV1560	N/A	DRUM SERVO SPEED IS TOO FAST-SLOWING DRUM DOWN BY HAND WILL CAUSE A PICTURE TO APPEAR.	CHECK C2010 AND C2011 FOR LEAKAGE/OPEN/SHORT
PANASONIC	PV1560	N/A	GARBLED AUDIO IN LP AND SLP	CHECK PINCH ROLLER,CLUTCH ASSY.;IDLER
PANASONIC	PV1560	N/A	NO AUDIO FROM TUNER-PLAYBACK AUDIO OK	REPL. IC4001
PANASONIC	PV1560	N/A	QUITS PLAYING & SQUELS FROM POWER SUPPLY	CHECK/REPLACE FILTER CAP C1006
PANASONIC	PV1560	N/A	POOR CAPSTAN SPEED OR AUDIO QUIVER ON SP AND CAPSTAN PULSATES BACK AND FORTH ON LP AND SLP	CHECK/REPLACE C1015,C1016,C1018 AND C1019 IN POWER SUPPLY
PANASONIC	PV1560	N/A	TRACKING ADJUSTMENTS	MOST ACCURATELY PERFORMED IN SP MODE.
PANASONIC	PV1560	N/A	DEAD WITH OPEN FUSE	CHECK D1001,Q1001,R1003
PANASONIC	PV1560	N/A	CAPSTAN AND DRUM MOTORS WILL NOT RUN	CHECK FOR OPEN PR1 ON CAPSTAN/DRUM MOTOR DRIVE CBA
PANASONIC	PV1560	N/A	RF RADIATION LINES IN PICTURE - GETS WORSE WHILE UNIT IS GOING INTO PLAY (WHEN MOTORS ARE RUNNING) BEFORE VCR MODE	CHECK/REPLACE C7,C9,C10,C14,C15,C16,C17,C18,C19,C23
PANASONIC	PV1560	N/A	WON'T RECORD -- MANUAL OR OTR	CLEAN OR REPLACE ERASE PROTECT SWITCH
PANASONIC	PV1560	N/A	HORZ LINES-DRUM MOTOR RUNNING TOO FAST	REPLACE DD CYL. MOTOR
PANASONIC	PV1560	N/A	LOADING MOTOR SLOW OR SLUGGISH	CHECK/REPLACE C1015 OR C1016
PANASONIC	PV1560	N/A	COLOR FADES IN AND OUT	CHECK/REPLACE UPPER CYLINDER UNIT
PANASONIC	PV1560	N/A	NO FIP LOADING MOTOR ENGAGES OK	CHECK/REPLACE C1020 C1021 L1005
PANASONIC	PV1560	N/A	PICTURE GETS DARKER OR LIGHTER ON PLAYBACK ONLY AND MAY ALSO LOSE COLOR	CHECK/RESOLDER GROUND CONNECTIONS ON R3122
PANASONIC	PV1560	N/A	NO PICTURE DURING PLAYBACK-ONLY GREY SCREEN	CHECK/REPLACE C3009 FOR SHORT
PANASONIC	PV1560	N/A	UNIT ACCEPTS TAPE BUT NO OTHER FUNCTIONS WILL WORK	CHECK/REPLACE LED SENSOR LAMP UNIT
PANASONIC	PV1560	N/A	DEAD	CHECK/REPLACE D1014 AND D1010 (MAY CHECK GOOD)
PANASONIC	PV1560	N/A	NO PLAYBACK VIDEO AND APPEARS THAT HEADS ARE DIRTY	CHECK/REPLACE C3003 FOR SHORT
PANASONIC	PV1560	N/A	NO DRUM/NO CAPSTAN	CHECK PR1 (CIRCUIT PROTECTOR) MOTOR DRIVE BOARD
PANASONIC	PV1560	N/A	NO PICTURE THRU THE TUNER BUT PLAYS TAPE OK	CHECK/REPLACE IC7001
PANASONIC	PV1560	N/A	PIX JITTERS ON SPECIAL EFFECTS	CHECK V-LOCK ADJUSTMENT-WORN HEADS-PG SHIFTERS TR.FIX
PANASONIC	PV1560	N/A	DEAD	CHECK/REPLACE Q1001 AND IC1001
PANASONIC	PV1560	N/A	DEW INDICATOR ILLUMINATES AND UNIT SHUTS DOWN	LOOSE CONNECTIONS ONTHE P3 PLUG
PANASONIC	PV1560	N/A	VCR DOESN'T ERASE OLD AUDIO	CHECK/REPLACE C4023
PANASONIC	PV1563	N/A	RF RADIATION LINES IN PICTURE - GETS WORSE WHILE UNIT IS GOING INTO PLAY (WHEN MOTORS ARE RUNNING) BEFORE VCR MODE	CHECK/REPLACE C7,C9,C10,C14,C15,C16,C17,C18,C19,C23
PANASONIC	PV2004	N/A	BREAK LIFTER ARM WHEN UNLOADING	CHECK FOR BENT METAL TAPE FLAP OPENER (RIGHT FRONT
PANASONIC	PV2004	N/A	WILL NOT REWIND AND EATS TAPES ON PLAYBACK	EXAMINE THE GEAR DIRECTLY BELOW MAIN DRIVE PULLEY. THIS IS ITEM# 141 ON THE BREAK DOWN.
PANASONIC	PV2004	N/A	NO PIX OUT OF THE RF MODULATOR--VIDEO/AUDIO OUTPUTS OK	CHECK ALL SURFACE MOUNT DIODE INSIDE RF CONVERTER
PANASONIC	PV2004	N/A	ONLY REWINDS WHEN POWERED UP	CHECK FOR OPEN SOLENOID (PS00029)
PANASONIC	PV2004	N/A	BLOWS AC LINE FUSE IMMEDIATELY	CHECK F1001,D1001,C1004,Q1001,Q1002,D1015,D1005
PANASONIC	PV2004	N/A	ERRATIC OPERATION-LOADS TAPE IN VCR THEN NOTHING-MAY BEGIN TO PLAY TAPE AND JUST STOP BUT STAYS LOADED	CHECK/REPLACE MODE SWITCH ON RIGHT SIDE OF CASSETTE HOUSING AND HARD WIRE 4 WIRE PLUG CONNECTION.
PANASONIC	PV2800	N/A	WILL NOT REWIND AND EATS TAPES ON PLAYBACK	EXAMINE THE GEAR DIRECTLY BELOW MAIN DRIVE PULLEY. THIS IS ITEM# 141 ON THE BREAK DOWN.
PANASONIC	PV2800	N/A	FAILURE OF SOLENOID	REPLACE SOLENOID AND MODE SELECT SW.-ADD A 1k TO THE END OF R6100 AWAY FROM IC W/1uF AT OTHER END TO GRD.
PANASONIC	PV2801	N/A	FAILURE OF SOLENOID	REPLACE SOLENOID AND MODE SELECT SW.-ADD A 1k TO THE END OF R6100 AWAY FROM IC W/1uF AT OTHER END TO GRD.
PANASONIC	PV2801	N/A	WILL NOT REWIND AND EATS TAPES ON PLAYBACK	EXAMINE THE GEAR DIRECTLY BELOW MAIN DRIVE PULLEY. THIS IS ITEM# 141 ON THE BREAK DOWN.
PANASONIC	PV2802	N/A	FAILURE OF SOLENOID	REPLACE SOLENOID AND MODE SELECT SW.-ADD A 1k TO THE END OF R6100 AWAY FROM IC W/1uF AT OTHER END TO GRD.
PANASONIC	PV2802	N/A	WILL NOT REWIND AND EATS TAPES ON PLAYBACK	EXAMINE THE GEAR DIRECTLY BELOW MAIN DRIVE PULLEY. THIS IS ITEM# 141 ON THE BREAK DOWN.
PANASONIC	PV2803	N/A	FAILURE OF SOLENOID	REPLACE SOLENOID AND MODE SELECT SW.-ADD A 1k TO THE END OF R6100 AWAY FROM IC W/1uF AT OTHER END TO GRD.
PANASONIC	PV2803	N/A	WILL NOT REWIND AND EATS TAPES ON PLAYBACK	EXAMINE THE GEAR DIRECTLY BELOW MAIN DRIVE PULLEY. THIS IS ITEM# 141 ON THE BREAK DOWN.
PANASONIC	PV2805	N/A	WILL NOT REWIND AND EATS TAPES ON PLAYBACK	EXAMINE THE GEAR DIRECTLY BELOW MAIN DRIVE PULLEY. THIS IS ITEM# 141 ON THE BREAK DOWN.
PANASONIC	PV2805	N/A	FAILURE OF SOLENOID	REPLACE SOLENOID AND MODE SELECT SW.-ADD A 1k TO THE END OF R6100 AWAY FROM IC W/1uF AT OTHER END TO GRD.
PANASONIC	PV2812	N/A	WILL NOT REWIND AND EATS TAPES ON PLAYBACK	EXAMINE THE GEAR DIRECTLY BELOW MAIN DRIVE PULLEY. THIS IS ITEM# 141 ON THE BREAK DOWN.
PANASONIC	PV2812	N/A	FAILURE OF SOLENOID	REPLACE SOLENOID AND MODE SELECT SW.-ADD A 1k TO THE END OF R6100 AWAY FROM IC W/1uF AT OTHER END TO GRD.
PANASONIC	PV2850	N/A	WILL NOT REWIND AND EATS TAPES ON PLAYBACK	EXAMINE THE GEAR DIRECTLY BELOW MAIN DRIVE PULLEY. THIS IS ITEM# 141 ON THE BREAK DOWN.
PANASONIC	PV2850	N/A	FAILURE OF SOLENOID	REPLACE SOLENOID AND MODE SELECT SW.-ADD A 1k TO THE END OF R6100 AWAY FROM IC W/1uF AT OTHER END TO GRD.
PANASONIC	PV2900	N/A	ONLY REWINDS WHEN POWERED UP	CHECK FOR OPEN SOLENOID (PS00029)
PANASONIC	PV2900	N/A	NO PIX OUT OF THE RF MODULATOR--VIDEO/AUDIO OUTPUTS OK	CHECK ALL SURFACE MOUNT DIODE INSIDE RF CONVERTER
PANASONIC	PV2900	N/A	WILL NOT REWIND AND EATS TAPES ON PLAYBACK	EXAMINE THE GEAR DIRECTLY BELOW MAIN DRIVE PULLEY. THIS IS ITEM# 141 ON THE BREAK DOWN.
PANASONIC	PV2900	N/A	BREAK LIFTER ARM WHEN UNLOADING	CHECK FOR BENT METAL TAPE FLAP OPENER (RIGHT FRONT
PANASONIC	PV2900	N/A	ERRATIC OPERATION-LOADS TAPE IN VCR THEN NOTHING-MAY BEGIN TO PLAY TAPE AND JUST STOP BUT STAYS LOADED	CHECK/REPLACE MODE SWITCH ON RIGHT SIDE OF CASSETTE HOUSING AND HARD WIRE 4 WIRE PLUG CONNECTION.
PANASONIC	PV2900	N/A	BLOWS AC LINE FUSE IMMEDIATELY	CHECK F1001,D1001,C1004,Q1001,Q1002,D1015,D1005
PANASONIC	PV2903	N/A	FAILURE OF SOLENOID	REPLACE SOLENOID AND MODE SELECT SW.-ADD A 1k TO THE END OF R6100 AWAY FROM IC W/1uF AT OTHER END TO GRD.
PANASONIC	PV2903	N/A	WILL NOT REWIND AND EATS TAPES ON PLAYBACK	EXAMINE THE GEAR DIRECTLY BELOW MAIN DRIVE PULLEY. THIS IS ITEM# 141 ON THE BREAK DOWN.
PANASONIC	PV2912	N/A	WILL NOT REWIND AND EATS TAPES ON PLAYBACK	EXAMINE THE GEAR DIRECTLY BELOW MAIN DRIVE PULLEY. THIS IS ITEM# 141 ON THE BREAK DOWN.
PANASONIC	PV2912	N/A	FAILURE OF SOLENOID	REPLACE SOLENOID AND MODE SELECT SW.-ADD A 1k TO THE END OF R6100 AWAY FROM IC W/1uF AT OTHER END TO GRD.
PANASONIC	PV3000	N/A	LOW/NO AUDIO-MOTOR BOATING	CHECK/CLEAN RY4001 AND RY4002
PANASONIC	PV4010	N/A	BREAK LIFTER ARM WHEN UNLOADING	CHECK FOR BENT METAL TAPE FLAP OPENER (RIGHT FRONT
PANASONIC	PV4010	N/A	BLOWS AC LINE FUSE IMMEDIATELY	CHECK F1001,D1001,C1004,Q1001,Q1002,D1015,D1005
PANASONIC	PV4010	N/A	ONLY REWINDS WHEN POWERED UP	CHECK FOR OPEN SOLENOID (PS00029)
PANASONIC	PV4010	N/A	ERRATIC OPERATION-LOADS TAPE IN VCR THEN NOTHING-MAY BEGIN TO PLAY TAPE AND JUST STOP BUT STAYS LOADED	CHECK/REPLACE MODE SWITCH ON RIGHT SIDE OF CASSETTE HOUSING AND HARD WIRE 4 WIRE PLUG CONNECTION.
PANASONIC	PV4010	N/A	NO PIX OUT OF THE RF MODULATOR--VIDEO/AUDIO OUTPUTS OK	CHECK ALL SURFACE MOUNT DIODE INSIDE RF CONVERTER
PANASONIC	PV4010	N/A	WILL NOT REWIND AND EATS TAPES ON PLAYBACK	EXAMINE THE GEAR DIRECTLY BELOW MAIN DRIVE PULLEY. THIS IS ITEM# 141 ON THE BREAK DOWN.
PANASONIC	PV4720	N/A	FLOURESCENT DISPLAY VERY ERRATIC OR OUT COMPLETELY	CHECK/REPLACE C1004
PANASONIC	PV4720	N/A	PIX JITTERS ON SPECIAL EFFECTS	CHECK V-LOCK ADJUSTMENT-WORN HEADS-PG SHIFTERS TR.FIX
PANASONIC	PV4720	N/A	GARBLED AUDIO IN LP AND SLP	CHECK PINCH ROLLER,CLUTCH ASSY.;IDLER
PANASONIC	PV4720	N/A	GARBLED AUDIO-TUNER AUDIO NOT SWITCHING ON P.B.	REPLACE IC4001
PANASONIC	PV4720	N/A	AFTER UNIT RUNS FOR 1/2 TO 1 HOUR, DISPLAY GOES OUT AND VCR LOCKS UP - WON'T TAKE ANY COMMANDS	CHECK/REPLACE IC7502 (MN1280-R) RESET IC
PANASONIC	PV4720	N/A	ONE TICK FROM POWER SUPPLY-NO DISPLAY-NO POWER	CHECK PR1001,L1003,D1011,C1015 AND C1016
PANASONIC	PV4720	N/A	CAPSTAN SPINS THEN POWER SHUTS OFF (AT POWER UP)	CHECK IC6001 AND IC6002
PANASONIC	PV4720	N/A	DRUM MOTOR WILL NOT RUN	CHECK/REPLACE IC2603
PANASONIC	PV4720	N/A	PICTURE WOULD GO FROM GOOD TO SNOW-GOOD TO SNOW	CHECK/REPLACE C2023
PANASONIC	PV4720	N/A	POWER SUPPLY IS TICKING	CHECK D1007 FOR SHORT OR LEAKAGE
PANASONIC	PV4720	N/A	NO DISPLAY AND NO FUSES BLOWN	CHECK/REPLACE C1015 AND C1016 (330uF @ 16v)
PANASONIC	PV4720	N/A	NO COLOR	ADJUST VCO,VXO--CHECK 3.58MHZ,4.2MHZ,629KHZ
PANASONIC	PV4720	N/A	TV/VCR FUNCTIONS DOESN'T WORK BUT INDICATOR DOES LIGHT IN THE FIP DISPLAY	CHECK/REPLACE IC7601
PANASONIC	PV4720	N/A	WHEN UNIT IS PLUGGED IN,CAPSTAN RUNS 4-5 SECONDS AND SHUTS DOWN.	CHECK/REPLACE D1008 AND R1010
PANASONIC	PV4720	N/A	TRACKING ADJUSTMENTS	MOST ACCURATELY PERFORMED IN SP MODE.
PANASONIC	PV4720	N/A	DEAD SET AND SHORT ON THE 5 VOLT LINE	CHECK/REPLACE C3137 AND PR1001
PANASONIC	PV4720	N/A	NO AUDIO RECORDED AT ANY SPEED	CHECK IC4001
PANASONIC	PV4720	N/A	WON'T RECORD -- MANUAL OR OTR	CLEAN OR REPLACE ERASE PROTECT SWITCH
PANASONIC	PV4720	N/A	DEAD WITH NO BLOWN FUSE OR REGULATOR TRANSISTOR	CHECK/REPLACE D1007 FOR SHORT (6.2V ZENER)
PANASONIC	PV4720	N/A	WOW & FLUTTER MOSTLY IN SLP SPEED	CHECK/REPLACE PINCH ROLLER
PANASONIC	PV4720	N/A	TRACKING PROBLEMS IN SP MODE AND 'DONALD DUCK' IN LP AND SLP MODES	CHECK/REPLACE C2023 FOR SHORT
PANASONIC	PV4720	N/A	SUPPLY REELS START TURNING AS SOON AS UNIT IS PLUGGED IN BUT WILL NOT STAY ON - WILL NOT LOAD CASSETTE	CHECK/REPLACE R1010,D1008 AND C1011
PANASONIC	PV4720	N/A	NO TUNER VIDEO BUT PLAYS A TAPE OK	CHECK/REPLACE L708,R721 AND C723
PANASONIC	PV4720	N/A	DD CYLINDER RUNS FOR ABOUT 1 MINUTE - CHANNEL NUMBERS CHANGE BUT RECEIVES ONLY SNOW	CHECK/REPLACE D1008 AND R1010
PANASONIC	PV4760	N/A	WOW & FLUTTER MOSTLY IN SLP SPEED	CHECK/REPLACE PINCH ROLLER
PANASONIC	PV4760	N/A	NO PLAYBACK OF PRERECORDED TAPE	CORR. PLUG CONN. TO HEAD AMP IC BEFORE REPLACE IC3502
PANASONIC	PV4760	N/A	DRUM SERVO SPEED IS TOO FAST-SLOWING DRUM DOWN BY HAND WILL CAUSE A PICTURE TO APPEAR.	CHECK C2010 AND C2011 FOR LEAKAGE/OPEN/SHORT
PANASONIC	PV4760	N/A	GARBLED AUDIO IN LP AND SLP	CHECK PINCH ROLLER,CLUTCH ASSY.;IDLER
PANASONIC	PV4760	N/A	PIX WIGGLES;COLOR SMEARS AFTER 10 TO 30MINS. PB	CHECK C3006
PANASONIC	PV4800	N/A	FAILURE OF SOLENOID	REPLACE SOLENOID AND MODE SELECT SW.-ADD A 1k TO THE END OF R6100 AWAY FROM IC W/1uF AT OTHER END TO GRD.
PANASONIC	PV4800	N/A	WILL NOT REWIND AND EATS TAPES ON PLAYBACK	EXAMINE THE GEAR DIRECTLY BELOW MAIN DRIVE PULLEY. THIS IS ITEM# 141 ON THE BREAK DOWN.
PANASONIC	PV4812	N/A	WILL NOT REWIND AND EATS TAPES ON PLAYBACK	EXAMINE THE GEAR DIRECTLY BELOW MAIN DRIVE PULLEY. THIS IS ITEM# 141 ON THE BREAK DOWN.
PANASONIC	PV4812	N/A	FAILURE OF SOLENOID	REPLACE SOLENOID AND MODE SELECT SW.-ADD A 1k TO THE END OF R6100 AWAY FROM IC W/1uF AT OTHER END TO GRD.
PANASONIC	PV4820	N/A	DEAD	CHECK/REPLACE C1015,C1016,C1018 AND C1019 IN POWER SUPPLY
PANASONIC	PV4820	N/A	DEAD SET - NO DISPLAY	CHECK/REPLACE Q1001,Q1002,D1008,C1016 AND C1021
PANASONIC	PV4850	N/A	WILL NOT REWIND AND EATS TAPES ON PLAYBACK	EXAMINE THE GEAR DIRECTLY BELOW MAIN DRIVE PULLEY. THIS IS ITEM# 141 ON THE BREAK DOWN.
PANASONIC	PV4850	N/A	FAILURE OF SOLENOID	REPLACE SOLENOID AND MODE SELECT SW.-ADD A 1k TO THE END OF R6100 AWAY FROM IC W/1uF AT OTHER END TO GRD.
PANASONIC	PV4863	N/A	WILL NOT REWIND AND EATS TAPES ON PLAYBACK	EXAMINE THE GEAR DIRECTLY BELOW MAIN DRIVE PULLEY. THIS IS ITEM# 141 ON THE BREAK DOWN.
PANASONIC	PV4863	N/A	FAILURE OF SOLENOID	REPLACE SOLENOID AND MODE SELECT SW.-ADD A 1k TO THE END OF R6100 AWAY FROM IC W/1uF AT OTHER END TO GRD.
PANASONIC	PV4868	N/A	FAILURE OF SOLENOID	REPLACE SOLENOID AND MODE SELECT SW.-ADD A 1k TO THE END OF R6100 AWAY FROM IC W/1uF AT OTHER END TO GRD.
PANASONIC	PV4868	N/A	WILL NOT REWIND AND EATS TAPES ON PLAYBACK	EXAMINE THE GEAR DIRECTLY BELOW MAIN DRIVE PULLEY. THIS IS ITEM# 141 ON THE BREAK DOWN.
PANASONIC	PV4880	N/A	FAILURE OF SOLENOID	REPLACE SOLENOID AND MODE SELECT SW.-ADD A 1k TO THE END OF R6100 AWAY FROM IC W/1uF AT OTHER END TO GRD.
PANASONIC	PV4880	N/A	WILL NOT REWIND AND EATS TAPES ON PLAYBACK	EXAMINE THE GEAR DIRECTLY BELOW MAIN DRIVE PULLEY. THIS IS ITEM# 141 ON THE BREAK DOWN.
PANASONIC	PV4961	N/A	WILL NOT REWIND AND EATS TAPES ON PLAYBACK	EXAMINE THE GEAR DIRECTLY BELOW MAIN DRIVE PULLEY. THIS IS ITEM# 141 ON THE BREAK DOWN.
PANASONIC	PV4961	N/A	NO PIX OUT OF THE RF MODULATOR--VIDEO/AUDIO OUTPUTS OK	CHECK ALL SURFACE MOUNT DIODE INSIDE RF CONVERTER
PANASONIC	PV4961	N/A	BLOWS AC LINE FUSE IMMEDIATELY	CHECK F1001,D1001,C1004,Q1001,Q1002,D1015,D1005
PANASONIC	PV4961	N/A	ERRATIC OPERATION-LOADS TAPE IN VCR THEN NOTHING-MAY BEGIN TO PLAY TAPE AND JUST STOP BUT STAYS LOADED	CHECK/REPLACE MODE SWITCH ON RIGHT SIDE OF CASSETTE HOUSING AND HARD WIRE 4 WIRE PLUG CONNECTION.
PANASONIC	PV4961	N/A	NO AUDIO ON TUNER BUT TAPE PLAYBACK IS OK	CHECK/REPLACE R4042 FOR OPEN
PANASONIC	PV4961	N/A	ONLY REWINDS WHEN POWERED UP	CHECK FOR OPEN SOLENOID (PS00029)
PANASONIC	PV4961	N/A	BREAK LIFTER ARM WHEN UNLOADING	CHECK FOR BENT METAL TAPE FLAP OPENER (RIGHT FRONT
PANASONIC	PV5400D	N/A	DEAD ON BATTERY AND AC	CHECK/REPLACE RL6502 OR CLEAN CONTACTS WITH A BURNISHING TOOL.
PANASONIC	PV5400D	N/A	VCR WILL NOT POWER UP--TUNER IS NORMAL	CHECK OR CLEAN CONTACTS ON RL6502---CHECK FOR 12V AT PIN 2 OF IC1002-IF LOW REPAIR RELAY
PANASONIC	PV5400D	N/A	FUNCTIONS THAT WORK ARE CLOCK TAPE LOAD/UNLOAD	CHECK 9V SUPP.IF LOW REPLACE IC1001 OR IC1002
PANASONIC	PV5400D	N/A	WHEN PLUGGING UNIT IN DD CYLINDER SPINS	CHECK/REPLACE IC6401
PANASONIC	PV5400D	N/A	GARBLED AUDIO PICTURE UNCLEAR ON SELF REC.TAPE	IF THE FG SIGNAL IS UNSTABLE CHECK/REPLACE IC2006
PANASONIC	PV5800	N/A	FUNCTIONS THAT WORK ARE CLOCK TAPE LOAD/UNLOAD	CHECK 9V SUPP.IF LOW REPLACE IC1001 OR IC1002
PANASONIC	PV5800	N/A	WHEN PLUGGING UNIT IN DD CYLINDER SPINS	CHECK/REPLACE IC6401
PANASONIC	PV5800	N/A	VCR WILL NOT POWER UP--TUNER IS NORMAL	CHECK OR CLEAN CONTACTS ON RL6502---CHECK FOR 12V AT PIN 2 OF IC1002-IF LOW REPAIR RELAY
PANASONIC	PV5800	N/A	GARBLED AUDIO PICTURE UNCLEAR ON SELF REC.TAPE	IF THE FG SIGNAL IS UNSTABLE CHECK/REPLACE IC2006
PANASONIC	PV8000G	N/A	WHEN PLUGGING UNIT IN DD CYLINDER SPINS	CHECK/REPLACE IC6401
PANASONIC	PV8000G	N/A	LCD DIMS AFTER A FEW SECONDS	REPLACE IC1001 (UN101) ON FRONT PANEL
PANASONIC	PV8000G	N/A	WILL NOT RESPOND WHEN CONNECTED TO TUNER-BAT.OK	CHECK D7527
PANASONIC	PV9000	N/A	LCD DIMS AFTER A FEW SECONDS	REPLACE IC1001 (UN101) ON FRONT PANEL
PANASONIC	PVA860	N/A	DEAD--NO CLOCK OR DISPLAY	CHECK Q1005,Q1006,D1007
PANASONIC	PVA860	N/A	MULTIPLE COMPONENT FAILURE IN 5V & 12V SUPPLIES	ALWAYS REPLACE IC1001 WHEN REPLACING ANY COMPONENTS
PANASONIC	PVA860	N/A	WILL NOT TURN ON ONLY THE VCR LED ILLUMINATES	CHECK/REPLACE R1010,D1007,Q1006,Q1005,IC1001
PHILCO	V1004T	N/A	NO PLAYBACK VIDEO AND APPEARS THAT HEADS ARE DIRTY	CHECK/REPLACE C3003 FOR SHORT
PHILCO	V1004T	N/A	PICTURE GETS DARKER OR LIGHTER ON PLAYBACK ONLY AND MAY ALSO LOSE COLOR	CHECK/RESOLDER GROUND CONNECTIONS ON R3122
PHILCO	V1004T	N/A	WON'T RECORD -- MANUAL OR OTR	CLEAN OR REPLACE ERASE PROTECT SWITCH
PHILCO	V1004T	N/A	NO FIP LOADING MOTOR ENGAGES OK	CHECK/REPLACE C1020 C1021 L1005
PHILCO	V1004T	N/A	NO AUDIO FROM TUNER-PLAYBACK AUDIO OK	REPL. IC4001
PHILCO	V1004T	N/A	NO DRUM/NO CAPSTAN	CHECK PR1 (CIRCUIT PROTECTOR) MOTOR DRIVE BOARD
PHILCO	V1004T	N/A	GARBLED AUDIO IN LP AND SLP	CHECK PINCH ROLLER,CLUTCH ASSY.;IDLER
PHILCO	V1004T	N/A	HORZ LINES-DRUM MOTOR RUNNING TOO FAST	REPLACE DD CYL. MOTOR
PHILCO	V1004T	N/A	UNIT ACCEPTS TAPE BUT NO OTHER FUNCTIONS WILL WORK	CHECK/REPLACE LED SENSOR LAMP UNIT
PHILCO	V1004T	N/A	VCR DOESN'T ERASE OLD AUDIO	CHECK/REPLACE C4023
PHILCO	V1004T	N/A	PIX JITTERS ON SPECIAL EFFECTS	CHECK V-LOCK ADJUSTMENT-WORN HEADS-PG SHIFTERS TR.FIX
PHILCO	V1004T	N/A	NO PICTURE DURING PLAYBACK-ONLY GREY SCREEN	CHECK/REPLACE C3009 FOR SHORT
PHILCO	V1004T	N/A	DEW INDICATOR ILLUMINATES AND UNIT SHUTS DOWN	LOOSE CONNECTIONS ONTHE P3 PLUG
PHILCO	V1004T	N/A	QUITS PLAYING & SQUELS FROM POWER SUPPLY	CHECK/REPLACE FILTER CAP C1006
PHILCO	V1004T	N/A	WOW & FLUTTER MOSTLY IN SLP SPEED	CHECK/REPLACE PINCH ROLLER
PHILCO	V1004T	N/A	DEAD	CHECK/REPLACE Q1001 AND IC1001
PHILCO	V1004T	N/A	POOR CAPSTAN SPEED OR AUDIO QUIVER ON SP AND CAPSTAN PULSATES BACK AND FORTH ON LP AND SLP	CHECK/REPLACE C1015,C1016,C1018 AND C1019 IN POWER SUPPLY
PHILCO	V1004T	N/A	TRACKING ADJUSTMENTS	MOST ACCURATELY PERFORMED IN SP MODE.
PHILCO	V1004T	N/A	DEAD	CHECK/REPLACE D1014 AND D1010 (MAY CHECK GOOD)
PHILCO	V1004T	N/A	COLOR FADES IN AND OUT	CHECK/REPLACE UPPER CYLINDER UNIT
PHILCO	V1004T	N/A	CAPSTAN AND DRUM MOTORS WILL NOT RUN	CHECK FOR OPEN PR1 ON CAPSTAN/DRUM MOTOR DRIVE CBA
PHILCO	V1004T	N/A	NO COLOR	ADJUST VCO,VXO--CHECK 3.58MHZ,4.2MHZ,629KHZ
PHILCO	V1004T	N/A	DEAD WITH OPEN FUSE	CHECK D1001,Q1001,R1003
PHILCO	V1004T	N/A	DRUM SERVO SPEED IS TOO FAST-SLOWING DRUM DOWN BY HAND WILL CAUSE A PICTURE TO APPEAR.	CHECK C2010 AND C2011 FOR LEAKAGE/OPEN/SHORT
PHILCO	V1004T	N/A	NO PICTURE THRU THE TUNER BUT PLAYS TAPE OK	CHECK/REPLACE IC7001
PHILCO	V1004T	N/A	LOADING MOTOR SLOW OR SLUGGISH	CHECK/REPLACE C1015 OR C1016
PHILCO	V1320T	N/A	DEAD WITH OPEN FUSE	CHECK D1001,Q1001,R1003
PHILCO	V1320T	N/A	UNIT ACCEPTS TAPE BUT NO OTHER FUNCTIONS WILL WORK	CHECK/REPLACE LED SENSOR LAMP UNIT
PHILCO	V1320T	N/A	DEAD	CHECK/REPLACE D1014 AND D1010 (MAY CHECK GOOD)
PHILCO	V1320T	N/A	DRUM SERVO SPEED IS TOO FAST-SLOWING DRUM DOWN BY HAND WILL CAUSE A PICTURE TO APPEAR.	CHECK C2010 AND C2011 FOR LEAKAGE/OPEN/SHORT
PHILCO	V1320T	N/A	WOW & FLUTTER MOSTLY IN SLP SPEED	CHECK/REPLACE PINCH ROLLER
PHILCO	V1320T	N/A	NO AUDIO FROM TUNER-PLAYBACK AUDIO OK	REPL. IC4001
PHILCO	V1320T	N/A	GARBLED AUDIO IN LP AND SLP	CHECK PINCH ROLLER,CLUTCH ASSY.;IDLER
PHILCO	V1320T	N/A	LOADING MOTOR SLOW OR SLUGGISH	CHECK/REPLACE C1015 OR C1016
PHILCO	V1320T	N/A	WON'T RECORD -- MANUAL OR OTR	CLEAN OR REPLACE ERASE PROTECT SWITCH
PHILCO	V1320T	N/A	DEW INDICATOR ILLUMINATES AND UNIT SHUTS DOWN	LOOSE CONNECTIONS ONTHE P3 PLUG
PHILCO	V1320T	N/A	CAPSTAN AND DRUM MOTORS WILL NOT RUN	CHECK FOR OPEN PR1 ON CAPSTAN/DRUM MOTOR DRIVE CBA
PHILCO	V1320T	N/A	NO COLOR	ADJUST VCO,VXO--CHECK 3.58MHZ,4.2MHZ,629KHZ
PHILCO	V1320T	N/A	POOR CAPSTAN SPEED OR AUDIO QUIVER ON SP AND CAPSTAN PULSATES BACK AND FORTH ON LP AND SLP	CHECK/REPLACE C1015,C1016,C1018 AND C1019 IN POWER SUPPLY
PHILCO	V1320T	N/A	PICTURE GETS DARKER OR LIGHTER ON PLAYBACK ONLY AND MAY ALSO LOSE COLOR	CHECK/RESOLDER GROUND CONNECTIONS ON R3122
PHILCO	V1320T	N/A	NO PLAYBACK VIDEO AND APPEARS THAT HEADS ARE DIRTY	CHECK/REPLACE C3003 FOR SHORT
PHILCO	V1320T	N/A	NO PICTURE THRU THE TUNER BUT PLAYS TAPE OK	CHECK/REPLACE IC7001
PHILCO	V1320T	N/A	NO PICTURE DURING PLAYBACK-ONLY GREY SCREEN	CHECK/REPLACE C3009 FOR SHORT
PHILCO	V1320T	N/A	PIX JITTERS ON SPECIAL EFFECTS	CHECK V-LOCK ADJUSTMENT-WORN HEADS-PG SHIFTERS TR.FIX
PHILCO	V1320T	N/A	QUITS PLAYING & SQUELS FROM POWER SUPPLY	CHECK/REPLACE FILTER CAP C1006
PHILCO	V1320T	N/A	VCR DOESN'T ERASE OLD AUDIO	CHECK/REPLACE C4023
PHILCO	V1320T	N/A	HORZ LINES-DRUM MOTOR RUNNING TOO FAST	REPLACE DD CYL. MOTOR
PHILCO	V1320T	N/A	NO FIP LOADING MOTOR ENGAGES OK	CHECK/REPLACE C1020 C1021 L1005
PHILCO	V1320T	N/A	TRACKING ADJUSTMENTS	MOST ACCURATELY PERFORMED IN SP MODE.
PHILCO	V1320T	N/A	DEAD	CHECK/REPLACE Q1001 AND IC1001
PHILCO	V1320T	N/A	COLOR FADES IN AND OUT	CHECK/REPLACE UPPER CYLINDER UNIT
PHILCO	V1320T	N/A	NO DRUM/NO CAPSTAN	CHECK PR1 (CIRCUIT PROTECTOR) MOTOR DRIVE BOARD
PHILCO	VT2210	N/A	NO REWIND FUNCTION	CHECK/REPLACE RUBBER BUMPER ON DECK ASSY. (ITEM 41 ON DECK 3 EXPLODED VIEW) P/N# 483546667013
PHILCO	VT2240	N/A	ONLY A BLUE SCREEN IS RECORDED ON A TIMED RECORDING OF A HRC CABLE SIGNAL	CHANGE C667 TO A 2.2uF @ 50V
PHILCO	VT2521	N/A	UNIT WILL NOT REWIND OR FAST FORWARD	CHECK/REPLACE B81 (LEVER) ALSO INSPECT B34/145 MAIN LEVER AND B16/358 CAM GEAR FOR DAMAGE
PHILCO	VT2521	N/A	WITH AUTOMATIC DAYLIGHT SAVINGS FEATURE TURNED ON, CLOCK WILL LOSE AN HOUR EVERY SUNDAY DURING THE MONTH OF OCTOBER	CHECK/REPLACE IC6001 WITH NEW TYPE (P/N# 483520917458)
PHILCO	VT2521	N/A	1 KHz AUDIO SQUEAL IN PLAYBACK AUDIO OF A RECORDING	INSTALL SHIELDING KIT (P/N# 483531057353)
PHILCO	VT2521	N/A	WARBLE IN AUDIO DURING PLAYBACK OF LINEAR AUDIO - CAN BE INTERMITTENT - MOST NOTICED ON STEADY TONES	CHECK/REPLACE CAPSTAN MOTOR ASSY.
PHILCO	VT2521	N/A	DEAD SET	CHECK/REPLACE Q01 (2SC4204),Q02 (2SC4418),R10 (82 1watt), D06 (1N4148), R14 (0.68 1watt), R02 (4.7 2watt)
PHILCO	VT2541	N/A	1 KHz AUDIO SQUEAL IN PLAYBACK AUDIO OF A RECORDING	INSTALL SHIELDING KIT (P/N# 483531057353)
PHILCO	VT2541	N/A	DEAD SET	CHECK/REPLACE Q01 (2SC4204),Q02 (2SC4418),R10 (82 1watt), D06 (1N4148), R14 (0.68 1watt), R02 (4.7 2watt)
PHILCO	VT2541	N/A	WARBLE IN AUDIO DURING PLAYBACK OF LINEAR AUDIO - CAN BE INTERMITTENT - MOST NOTICED ON STEADY TONES	CHECK/REPLACE CAPSTAN MOTOR ASSY.
PHILCO	VT2541	N/A	UNIT WILL NOT REWIND OR FAST FORWARD	CHECK/REPLACE B81 (LEVER) ALSO INSPECT B34/145 MAIN LEVER AND B16/358 CAM GEAR FOR DAMAGE
PHILCO	VT2620	N/A	UNIT WILL NOT PLAY, RECORD, F/F OR REWIND	CHECK CAPSTAN SHAFT STOPPER - IF IT HAS WORKED LOOSE, GENTLY TAP BACK INTO PLACE AND NICK CORNERS TO RETAIN
PHILCO	VT2640	N/A	UNIT WILL NOT PLAY, RECORD, F/F OR REWIND	CHECK CAPSTAN SHAFT STOPPER - IF IT HAS WORKED LOOSE, GENTLY TAP BACK INTO PLACE AND NICK CORNERS TO RETAIN
PHILCO	VT3010	N/A	DEW INDICATOR IS ON BUT VCR HAS NO DEW SENSOR	CHECK THE GROUND TO THE DEW INPUT (PIN 77) ON THE MICROPROCESSOR (IC6001)
PHILCO	VT3010	N/A	MULTIPLE SOLENOID FAILURES	REMOVE JUMPER AT C6001 AND INSTALL KIT# 483531057044
PHILCO	VT3010	N/A	WILL NOT REWIND AND EATS TAPES ON PLAYBACK	EXAMINE THE GEAR DIRECTLY BELOW MAIN DRIVE PULLEY. THIS IS ITEM# 141 ON THE BREAK DOWN.
PHILCO	VT3010	N/A	ERRATIC OPERATION-LOADS TAPE IN VCR THEN NOTHING-MAY BEGIN TO PLAY TAPE AND JUST STOP BUT STAYS LOADED	CHECK/REPLACE MODE SWITCH ON RIGHT SIDE OF CASSETTE HOUSING AND HARD WIRE 4 WIRE PLUG CONNECTION.
PHILCO	VT3020	N/A	ERRATIC OPERATION-LOADS TAPE IN VCR THEN NOTHING-MAY BEGIN TO PLAY TAPE AND JUST STOP BUT STAYS LOADED	CHECK/REPLACE MODE SWITCH ON RIGHT SIDE OF CASSETTE HOUSING AND HARD WIRE 4 WIRE PLUG CONNECTION.
PHILCO	VT3020	N/A	MULTIPLE SOLENOID FAILURES	REMOVE JUMPER AT C6001 AND INSTALL KIT# 483531057044
PHILCO	VT3020	N/A	DEW INDICATOR IS ON BUT VCR HAS NO DEW SENSOR	CHECK THE GROUND TO THE DEW INPUT (PIN 77) ON THE MICROPROCESSOR (IC6001)
PHILCO	VT3020	N/A	WILL NOT REWIND AND EATS TAPES ON PLAYBACK	EXAMINE THE GEAR DIRECTLY BELOW MAIN DRIVE PULLEY. THIS IS ITEM# 141 ON THE BREAK DOWN.
PHILCO	VT3040	N/A	DEW INDICATOR IS ON BUT VCR HAS NO DEW SENSOR	CHECK THE GROUND TO THE DEW INPUT (PIN 77) ON THE MICROPROCESSOR (IC6001)
PHILCO	VT3040	N/A	ERRATIC OPERATION-LOADS TAPE IN VCR THEN NOTHING-MAY BEGIN TO PLAY TAPE AND JUST STOP BUT STAYS LOADED	CHECK/REPLACE MODE SWITCH ON RIGHT SIDE OF CASSETTE HOUSING AND HARD WIRE 4 WIRE PLUG CONNECTION.
PHILCO	VT3040	N/A	MULTIPLE SOLENOID FAILURES	REMOVE JUMPER AT C6001 AND INSTALL KIT# 483531057044
PHILCO	VT3040	N/A	WILL NOT REWIND AND EATS TAPES ON PLAYBACK	EXAMINE THE GEAR DIRECTLY BELOW MAIN DRIVE PULLEY. THIS IS ITEM# 141 ON THE BREAK DOWN.
PHILCO	VT3045	N/A	WILL NOT REWIND AND EATS TAPES ON PLAYBACK	EXAMINE THE GEAR DIRECTLY BELOW MAIN DRIVE PULLEY. THIS IS ITEM# 141 ON THE BREAK DOWN.
PHILCO	VT3045	N/A	MULTIPLE SOLENOID FAILURES	REMOVE JUMPER AT C6001 AND INSTALL KIT# 483531057044
PHILCO	VT3045	N/A	DEW INDICATOR IS ON BUT VCR HAS NO DEW SENSOR	CHECK THE GROUND TO THE DEW INPUT (PIN 77) ON THE MICROPROCESSOR (IC6001)
PHILCO	VT3045	N/A	INTERMITTENTLY GOES TO BLUE SCRN.--REW/FF SCAN PIX IS OK	CHECK FOR DEFECTIVE C2014 OR C2015 OR SOLDER CONNECTIONS ON EITHER.
PHILCO	VT3045	N/A	ERRATIC OPERATION-LOADS TAPE IN VCR THEN NOTHING-MAY BEGIN TO PLAY TAPE AND JUST STOP BUT STAYS LOADED	CHECK/REPLACE MODE SWITCH ON RIGHT SIDE OF CASSETTE HOUSING AND HARD WIRE 4 WIRE PLUG CONNECTION.
PHILCO	VT3120	N/A	BLOWS AC LINE FUSE IMMEDIATELY	CHECK F1001,D1001,C1004,Q1001,Q1002,D1015,D1005
PHILCO	VT3120	N/A	CLOCK LOSSES 6-8 MINUTES A MONTH	REPLACE THE CLOCK CRYSTAL WITH NEW VERSION (X7502)
PHILCO	VT3120	N/A	ERRATIC OPERATION-LOADS TAPE IN VCR THEN NOTHING-MAY BEGIN TO PLAY TAPE AND JUST STOP BUT STAYS LOADED	CHECK/REPLACE MODE SWITCH ON RIGHT SIDE OF CASSETTE HOUSING AND HARD WIRE 4 WIRE PLUG CONNECTION.
PHILCO	VT3120	N/A	WILL NOT REWIND AND EATS TAPES ON PLAYBACK	EXAMINE THE GEAR DIRECTLY BELOW MAIN DRIVE PULLEY. THIS IS ITEM# 141 ON THE BREAK DOWN.
PHILCO	VT3120	N/A	ONLY REWINDS WHEN POWERED UP	CHECK FOR OPEN SOLENOID (PS00029)
PHILCO	VT3120	N/A	DEW INDICATOR IS ON BUT VCR HAS NO DEW SENSOR	CHECK THE GROUND TO THE DEW INPUT (PIN 77) ON THE MICROPROCESSOR (IC6001)
PHILCO	VT3120	N/A	BREAK LIFTER ARM WHEN UNLOADING	CHECK FOR BENT METAL TAPE FLAP OPENER (RIGHT FRONT
PHILCO	VT3124	N/A	BLOWS AC LINE FUSE IMMEDIATELY	CHECK F1001,D1001,C1004,Q1001,Q1002,D1015,D1005
PHILCO	VT3124	N/A	ERRATIC OPERATION-LOADS TAPE IN VCR THEN NOTHING-MAY BEGIN TO PLAY TAPE AND JUST STOP BUT STAYS LOADED	CHECK/REPLACE MODE SWITCH ON RIGHT SIDE OF CASSETTE HOUSING AND HARD WIRE 4 WIRE PLUG CONNECTION.
PHILCO	VT3124	N/A	ONLY REWINDS WHEN POWERED UP	CHECK FOR OPEN SOLENOID (PS00029)
PHILCO	VT3124	N/A	BREAK LIFTER ARM WHEN UNLOADING	CHECK FOR BENT METAL TAPE FLAP OPENER (RIGHT FRONT
PHILCO	VT3124	N/A	WILL NOT REWIND AND EATS TAPES ON PLAYBACK	EXAMINE THE GEAR DIRECTLY BELOW MAIN DRIVE PULLEY. THIS IS ITEM# 141 ON THE BREAK DOWN.
PHILCO	VT3124	N/A	DEW INDICATOR IS ON BUT VCR HAS NO DEW SENSOR	CHECK THE GROUND TO THE DEW INPUT (PIN 77) ON THE MICROPROCESSOR (IC6001)
PHILCO	VT3140	N/A	BLOWS AC LINE FUSE IMMEDIATELY	CHECK F1001,D1001,C1004,Q1001,Q1002,D1015,D1005
PHILCO	VT3140	N/A	DEW INDICATOR IS ON BUT VCR HAS NO DEW SENSOR	CHECK THE GROUND TO THE DEW INPUT (PIN 77) ON THE MICROPROCESSOR (IC6001)
PHILCO	VT3140	N/A	ERRATIC OPERATION-LOADS TAPE IN VCR THEN NOTHING-MAY BEGIN TO PLAY TAPE AND JUST STOP BUT STAYS LOADED	CHECK/REPLACE MODE SWITCH ON RIGHT SIDE OF CASSETTE HOUSING AND HARD WIRE 4 WIRE PLUG CONNECTION.
PHILCO	VT3140	N/A	ONLY REWINDS WHEN POWERED UP	CHECK FOR OPEN SOLENOID (PS00029)
PHILCO	VT3140	N/A	WILL NOT REWIND AND EATS TAPES ON PLAYBACK	EXAMINE THE GEAR DIRECTLY BELOW MAIN DRIVE PULLEY. THIS IS ITEM# 141 ON THE BREAK DOWN.
PHILCO	VT3140	N/A	BREAK LIFTER ARM WHEN UNLOADING	CHECK FOR BENT METAL TAPE FLAP OPENER (RIGHT FRONT
PHILCO	VT3150	N/A	BREAK LIFTER ARM WHEN UNLOADING	CHECK FOR BENT METAL TAPE FLAP OPENER (RIGHT FRONT
PHILCO	VT3150	N/A	BLOWS AC LINE FUSE IMMEDIATELY	CHECK F1001,D1001,C1004,Q1001,Q1002,D1015,D1005
PHILCO	VT3150	N/A	ERRATIC OPERATION-LOADS TAPE IN VCR THEN NOTHING-MAY BEGIN TO PLAY TAPE AND JUST STOP BUT STAYS LOADED	CHECK/REPLACE MODE SWITCH ON RIGHT SIDE OF CASSETTE HOUSING AND HARD WIRE 4 WIRE PLUG CONNECTION.
PHILCO	VT3150	N/A	WILL NOT REWIND AND EATS TAPES ON PLAYBACK	EXAMINE THE GEAR DIRECTLY BELOW MAIN DRIVE PULLEY. THIS IS ITEM# 141 ON THE BREAK DOWN.
PHILCO	VT3150	N/A	ONLY REWINDS WHEN POWERED UP	CHECK FOR OPEN SOLENOID (PS00029)
PHILCO	VT3150	N/A	DEW INDICATOR IS ON BUT VCR HAS NO DEW SENSOR	CHECK THE GROUND TO THE DEW INPUT (PIN 77) ON THE MICROPROCESSOR (IC6001)
PHILCO	VT8735	N/A	AFTER UNIT RUNS FOR 1/2 TO 1 HOUR, DISPLAY GOES OUT AND VCR LOCKS UP - WON'T TAKE ANY COMMANDS	CHECK/REPLACE IC7502 (MN1280-R) RESET IC
PHILCO	VT8760	N/A	INTERMITTENT LOSS OF RECORDED AUDIO - PLAYBACK OF PRE-RECORDED TAPES WAS NORMAL.	CHECK/REPLACE OR CLEAN ERASE PROTECT SWITCH
PHILCO	VT8760	N/A	INTERMITTENT LOSS OF RECORDED AUDIO - PRERECORDED AUDIO IS NORMAL.	CHECK/REPLACE ANTI-RECORD (ERASE PROTECT) SWITCH -- USUALLY THIS CAN BE CLEANED UP WITH A BURNISHING TOOL
PHILCO	VT8765	N/A	AUDIO HAS A LOT OF WOW AND FLUTTER - MAY HAVE SOME FLASHING IN THE VIDEO AS WELL	CHECK/REPLACE C1015 AND C1016
PHILIPS	CR1843	N/A	BLOWS AC LINE FUSE IMMEDIATELY	CHECK F1001,D1001,C1004,Q1001,Q1002,D1015,D1005
PHILIPS	CR1843	N/A	WILL NOT REWIND AND EATS TAPES ON PLAYBACK	EXAMINE THE GEAR DIRECTLY BELOW MAIN DRIVE PULLEY. THIS IS ITEM# 141 ON THE BREAK DOWN.
PHILIPS	CR1843	N/A	BREAK LIFTER ARM WHEN UNLOADING	CHECK FOR BENT METAL TAPE FLAP OPENER (RIGHT FRONT
PHILIPS	CR1843	N/A	ONLY REWINDS WHEN POWERED UP	CHECK FOR OPEN SOLENOID (PS00029)
PHILIPS	CR6493	N/A	BLOWS AC LINE FUSE IMMEDIATELY	CHECK F1001,D1001,C1004,Q1001,Q1002,D1015,D1005
PHILIPS	CR6493	N/A	ONLY REWINDS WHEN POWERED UP	CHECK FOR OPEN SOLENOID (PS00029)
PHILIPS	CR6493	N/A	BREAK LIFTER ARM WHEN UNLOADING	CHECK FOR BENT METAL TAPE FLAP OPENER (RIGHT FRONT
PHILIPS	CR6493	N/A	WILL NOT REWIND AND EATS TAPES ON PLAYBACK	EXAMINE THE GEAR DIRECTLY BELOW MAIN DRIVE PULLEY. THIS IS ITEM# 141 ON THE BREAK DOWN.
PHILIPS	CR6593	N/A	WILL NOT REWIND AND EATS TAPES ON PLAYBACK	EXAMINE THE GEAR DIRECTLY BELOW MAIN DRIVE PULLEY. THIS IS ITEM# 141 ON THE BREAK DOWN.
PHILIPS	CR6593	N/A	BLOWS AC LINE FUSE IMMEDIATELY	CHECK F1001,D1001,C1004,Q1001,Q1002,D1015,D1005
PHILIPS	CR6593	N/A	BREAK LIFTER ARM WHEN UNLOADING	CHECK FOR BENT METAL TAPE FLAP OPENER (RIGHT FRONT
PHILIPS	CR6593	N/A	ONLY REWINDS WHEN POWERED UP	CHECK FOR OPEN SOLENOID (PS00029)
PHILIPS	CR6693	N/A	WILL NOT REWIND AND EATS TAPES ON PLAYBACK	EXAMINE THE GEAR DIRECTLY BELOW MAIN DRIVE PULLEY. THIS IS ITEM# 141 ON THE BREAK DOWN.
PHILIPS	CR6693	N/A	ONLY REWINDS WHEN POWERED UP	CHECK FOR OPEN SOLENOID (PS00029)
PHILIPS	CR6693	N/A	BREAK LIFTER ARM WHEN UNLOADING	CHECK FOR BENT METAL TAPE FLAP OPENER (RIGHT FRONT
PHILIPS	CR6693	N/A	BLOWS AC LINE FUSE IMMEDIATELY	CHECK F1001,D1001,C1004,Q1001,Q1002,D1015,D1005
PHILIPS	CR9815	N/A	BLOWS AC LINE FUSE IMMEDIATELY	CHECK F1001,D1001,C1004,Q1001,Q1002,D1015,D1005
PHILIPS	CR9815	N/A	ONLY REWINDS WHEN POWERED UP	CHECK FOR OPEN SOLENOID (PS00029)
PHILIPS	CR9815	N/A	WILL NOT REWIND AND EATS TAPES ON PLAYBACK	EXAMINE THE GEAR DIRECTLY BELOW MAIN DRIVE PULLEY. THIS IS ITEM# 141 ON THE BREAK DOWN.
PHILIPS	CR9815	N/A	BREAK LIFTER ARM WHEN UNLOADING	CHECK FOR BENT METAL TAPE FLAP OPENER (RIGHT FRONT
PHILIPS	CR9840	N/A	WILL NOT REWIND AND EATS TAPES ON PLAYBACK	EXAMINE THE GEAR DIRECTLY BELOW MAIN DRIVE PULLEY. THIS IS ITEM# 141 ON THE BREAK DOWN.
PHILIPS	CR9840	N/A	BLOWS AC LINE FUSE IMMEDIATELY	CHECK F1001,D1001,C1004,Q1001,Q1002,D1015,D1005
PHILIPS	CR9840	N/A	BREAK LIFTER ARM WHEN UNLOADING	CHECK FOR BENT METAL TAPE FLAP OPENER (RIGHT FRONT
PHILIPS	CR9840	N/A	ONLY REWINDS WHEN POWERED UP	CHECK FOR OPEN SOLENOID (PS00029)
PHILIPS	P962	N/A	MECHANISM LOCKS UP - USUALLY AT THE END OF THE REWIND AND UNIT SHUTS OFF WITH TAPE STUCK	REF# B81 LEVER LACKS LUBRICATION AND STICKS - APPLY MOLYTONE GREASE (P/N# 483531057035)
PHILIPS	P962	N/A	NO VIDEO IN E-E MODE OR PLAYBACK	CHECK/RESOLDER CONNECTIONS ON C343 AND REPOSITION AWAY FROM MECHANISM
PHILIPS	P962VR	N/A	DEAD WITH MULTIPLE PARTS IN THE POWER SUPPLY BURNED CHECK/REPLACE R8,R9,R10 (27?483511057174), D08 ECG519 OR	483513037048),IC01(483513087078),R13/R14(1.5?483511057074) D16 (483513037135), Q01 (483513047139), Q02 (483513047879)
PHILIPS	P964	N/A	MECHANISM LOCKS UP - USUALLY AT THE END OF THE REWIND AND UNIT SHUTS OFF WITH TAPE STUCK	REF# B81 LEVER LACKS LUBRICATION AND STICKS - APPLY MOLYTONE GREASE (P/N# 483531057035)
PHILIPS	P964	N/A	NO VIDEO IN E-E MODE OR PLAYBACK	CHECK/RESOLDER CONNECTIONS ON C343 AND REPOSITION AWAY FROM MECHANISM
PHILIPS	P964VR	N/A	DEAD WITH MULTIPLE PARTS IN THE POWER SUPPLY BURNED CHECK/REPLACE R8,R9,R10 (27?483511057174), D08 ECG519 OR	483513037048),IC01(483513087078),R13/R14(1.5?483511057074) D16 (483513037135), Q01 (483513047139), Q02 (483513047879)
PHILIPS	P966	N/A	MECHANISM LOCKS UP - USUALLY AT THE END OF THE REWIND AND UNIT SHUTS OFF WITH TAPE STUCK	REF# B81 LEVER LACKS LUBRICATION AND STICKS - APPLY MOLYTONE GREASE (P/N# 483531057035)
PHILIPS	P966	N/A	NO VIDEO IN E-E MODE OR PLAYBACK	CHECK/RESOLDER CONNECTIONS ON C343 AND REPOSITION AWAY FROM MECHANISM
PHILIPS	P966VR	N/A	DEAD WITH MULTIPLE PARTS IN THE POWER SUPPLY BURNED CHECK/REPLACE R8,R9,R10 (27?483511057174), D08 ECG519 OR	483513037048),IC01(483513087078),R13/R14(1.5?483511057074) D16 (483513037135), Q01 (483513047139), Q02 (483513047879)
PHILIPS	SV2000	N/A	DEAD WITH MULTIPLE PARTS IN THE POWER SUPPLY BURNED CHECK/REPLACE R8,R9,R10 (27?483511057174), D08 ECG519 OR	483513037048),IC01(483513087078),R13/R14(1.5?483511057074) D16 (483513037135), Q01 (483513047139), Q02 (483513047879)
PHILIPS	VC4510	N/A	UNIT WILL NOT REWIND OR FAST FORWARD	CHECK/REPLACE B81 (LEVER) ALSO INSPECT B34/145 MAIN LEVER AND B16/358 CAM GEAR FOR DAMAGE
PHILIPS	VC4540	N/A	UNIT WILL NOT REWIND OR FAST FORWARD	CHECK/REPLACE B81 (LEVER) ALSO INSPECT B34/145 MAIN LEVER AND B16/358 CAM GEAR FOR DAMAGE
PHILIPS	VCU442	N/A	DEAD - NO POWER OR DISPLAY	CHECK/RESOLDER CONNECTIONS ON C953 OR CHECK FOR OPEN
PHILIPS	VR2040	N/A	WILL NOT REWIND AND EATS TAPES ON PLAYBACK	EXAMINE THE GEAR DIRECTLY BELOW MAIN DRIVE PULLEY. THIS IS ITEM# 141 ON THE BREAK DOWN.
PHILIPS	VR2040	N/A	NO POWER-INOPERABLE-NO FUNCTIONS OPERATE (MAYBE AFTER A SURGE OR LIGHTNING STRIKE)	CHECK Q102 - ALSO ADD 2 DIODES (MA165 - 5391100060) IN SERIES W/ANODE TO Q102-E & CATHODE TO PIN 3 (IC11)
PHILIPS	VR2040	N/A	DEW INDICATOR IS ON BUT VCR HAS NO DEW SENSOR	CHECK THE GROUND TO THE DEW INPUT (PIN 77) ON THE MICROPROCESSOR (IC6001)
PHILIPS	VR2060	N/A	DEW INDICATOR IS ON BUT VCR HAS NO DEW SENSOR	CHECK THE GROUND TO THE DEW INPUT (PIN 77) ON THE MICROPROCESSOR (IC6001)
PHILIPS	VR2060	N/A	NO POWER-INOPERABLE-NO FUNCTIONS OPERATE (MAYBE AFTER A SURGE OR LIGHTNING STRIKE)	CHECK Q102 - ALSO ADD 2 DIODES (MA165 - 5391100060) IN SERIES W/ANODE TO Q102-E & CATHODE TO PIN 3 (IC11)
PHILIPS	VR2060	N/A	WILL NOT REWIND AND EATS TAPES ON PLAYBACK	EXAMINE THE GEAR DIRECTLY BELOW MAIN DRIVE PULLEY. THIS IS ITEM# 141 ON THE BREAK DOWN.
PHILIPS	VR6485	N/A	WILL NOT REWIND AND EATS TAPES ON PLAYBACK	EXAMINE THE GEAR DIRECTLY BELOW MAIN DRIVE PULLEY. THIS IS ITEM# 141 ON THE BREAK DOWN.
PHILIPS	VR6485	N/A	BLOWS AC LINE FUSE IMMEDIATELY	CHECK F1001,D1001,C1004,Q1001,Q1002,D1015,D1005
PHILIPS	VR6485	N/A	DEW INDICATOR IS ON BUT VCR HAS NO DEW SENSOR	CHECK THE GROUND TO THE DEW INPUT (PIN 77) ON THE MICROPROCESSOR (IC6001)
PHILIPS	VR6485	N/A	ONLY REWINDS WHEN POWERED UP	CHECK FOR OPEN SOLENOID (PS00029)
PHILIPS	VR6485	N/A	BREAK LIFTER ARM WHEN UNLOADING	CHECK FOR BENT METAL TAPE FLAP OPENER (RIGHT FRONT
PHILIPS	VR6485	N/A	ERRATIC OPERATION-LOADS TAPE IN VCR THEN NOTHING-MAY BEGIN TO PLAY TAPE AND JUST STOP BUT STAYS LOADED	CHECK/REPLACE MODE SWITCH ON RIGHT SIDE OF CASSETTE HOUSING AND HARD WIRE 4 WIRE PLUG CONNECTION.
PHILIPS	VR6495	N/A	ONLY REWINDS WHEN POWERED UP	CHECK FOR OPEN SOLENOID (PS00029)
PHILIPS	VR6495	N/A	BREAK LIFTER ARM WHEN UNLOADING	CHECK FOR BENT METAL TAPE FLAP OPENER (RIGHT FRONT
PHILIPS	VR6495	N/A	WILL NOT REWIND AND EATS TAPES ON PLAYBACK	EXAMINE THE GEAR DIRECTLY BELOW MAIN DRIVE PULLEY. THIS IS ITEM# 141 ON THE BREAK DOWN.
PHILIPS	VR6495	N/A	BLOWS AC LINE FUSE IMMEDIATELY	CHECK F1001,D1001,C1004,Q1001,Q1002,D1015,D1005
PHILIPS	VR6495	N/A	DEW INDICATOR IS ON BUT VCR HAS NO DEW SENSOR	CHECK THE GROUND TO THE DEW INPUT (PIN 77) ON THE MICROPROCESSOR (IC6001)
PHILIPS	VR6495	N/A	NO POWER-INOPERABLE-NO FUNCTIONS OPERATE (MAYBE AFTER A SURGE OR LIGHTNING STRIKE)	CHECK Q102 - ALSO ADD 2 DIODES (MA165 - 5391100060) IN SERIES W/ANODE TO Q102-E & CATHODE TO PIN 3 (IC11)
PHILIPS	VR6495	N/A	ERRATIC OPERATION-LOADS TAPE IN VCR THEN NOTHING-MAY BEGIN TO PLAY TAPE AND JUST STOP BUT STAYS LOADED	CHECK/REPLACE MODE SWITCH ON RIGHT SIDE OF CASSETTE HOUSING AND HARD WIRE 4 WIRE PLUG CONNECTION.
PHILIPS	VR6585	N/A	ONLY REWINDS WHEN POWERED UP	CHECK FOR OPEN SOLENOID (PS00029)
PHILIPS	VR6585	N/A	DISPLAY PULSATES WHEN POWER SUPPLY HAS A LOAD ON IT	CHECK/REPLACE C121 AND C122
PHILIPS	VR6585	N/A	WILL NOT REWIND AND EATS TAPES ON PLAYBACK	EXAMINE THE GEAR DIRECTLY BELOW MAIN DRIVE PULLEY. THIS IS ITEM# 141 ON THE BREAK DOWN.
PHILIPS	VR6585	N/A	BREAK LIFTER ARM WHEN UNLOADING	CHECK FOR BENT METAL TAPE FLAP OPENER (RIGHT FRONT
PHILIPS	VR6585	N/A	DEW INDICATOR IS ON BUT VCR HAS NO DEW SENSOR	CHECK THE GROUND TO THE DEW INPUT (PIN 77) ON THE MICROPROCESSOR (IC6001)
PHILIPS	VR6585	N/A	ERRATIC OPERATION-LOADS TAPE IN VCR THEN NOTHING-MAY BEGIN TO PLAY TAPE AND JUST STOP BUT STAYS LOADED	CHECK/REPLACE MODE SWITCH ON RIGHT SIDE OF CASSETTE HOUSING AND HARD WIRE 4 WIRE PLUG CONNECTION.
PHILIPS	VR6586	N/A	DEW INDICATOR IS ON BUT VCR HAS NO DEW SENSOR	CHECK THE GROUND TO THE DEW INPUT (PIN 77) ON THE MICROPROCESSOR (IC6001)
PHILIPS	VR6586	N/A	WILL NOT REWIND AND EATS TAPES ON PLAYBACK	EXAMINE THE GEAR DIRECTLY BELOW MAIN DRIVE PULLEY. THIS IS ITEM# 141 ON THE BREAK DOWN.
PHILIPS	VR6586	N/A	BLOWS AC LINE FUSE IMMEDIATELY	CHECK F1001,D1001,C1004,Q1001,Q1002,D1015,D1005
PHILIPS	VR6586	N/A	ERRATIC OPERATION-LOADS TAPE IN VCR THEN NOTHING-MAY BEGIN TO PLAY TAPE AND JUST STOP BUT STAYS LOADED	CHECK/REPLACE MODE SWITCH ON RIGHT SIDE OF CASSETTE HOUSING AND HARD WIRE 4 WIRE PLUG CONNECTION.
PHILIPS	VR6595	N/A	WILL NOT REWIND AND EATS TAPES ON PLAYBACK	EXAMINE THE GEAR DIRECTLY BELOW MAIN DRIVE PULLEY. THIS IS ITEM# 141 ON THE BREAK DOWN.
PHILIPS	VR6595	N/A	NO POWER-INOPERABLE-NO FUNCTIONS OPERATE (MAYBE AFTER A SURGE OR LIGHTNING STRIKE)	CHECK Q102 - ALSO ADD 2 DIODES (MA165 - 5391100060) IN SERIES W/ANODE TO Q102-E & CATHODE TO PIN 3 (IC11)
PHILIPS	VR6595	N/A	ERRATIC OPERATION-LOADS TAPE IN VCR THEN NOTHING-MAY BEGIN TO PLAY TAPE AND JUST STOP BUT STAYS LOADED	CHECK/REPLACE MODE SWITCH ON RIGHT SIDE OF CASSETTE HOUSING AND HARD WIRE 4 WIRE PLUG CONNECTION.
PHILIPS	VR6595	N/A	ONLY REWINDS WHEN POWERED UP	CHECK FOR OPEN SOLENOID (PS00029)
PHILIPS	VR6595	N/A	BREAK LIFTER ARM WHEN UNLOADING	CHECK FOR BENT METAL TAPE FLAP OPENER (RIGHT FRONT
PHILIPS	VR6595	N/A	DEW INDICATOR IS ON BUT VCR HAS NO DEW SENSOR	CHECK THE GROUND TO THE DEW INPUT (PIN 77) ON THE MICROPROCESSOR (IC6001)
PHILIPS	VR6595	N/A	BLOWS AC LINE FUSE IMMEDIATELY	CHECK F1001,D1001,C1004,Q1001,Q1002,D1015,D1005
PHILIPS	VR6695	N/A	BLOWS AC LINE FUSE IMMEDIATELY	CHECK F1001,D1001,C1004,Q1001,Q1002,D1015,D1005
PHILIPS	VR6695	N/A	DEW INDICATOR IS ON BUT VCR HAS NO DEW SENSOR	CHECK THE GROUND TO THE DEW INPUT (PIN 77) ON THE MICROPROCESSOR (IC6001)
PHILIPS	VR6695	N/A	BREAK LIFTER ARM WHEN UNLOADING	CHECK FOR BENT METAL TAPE FLAP OPENER (RIGHT FRONT
PHILIPS	VR6695	N/A	ERRATIC OPERATION-LOADS TAPE IN VCR THEN NOTHING-MAY BEGIN TO PLAY TAPE AND JUST STOP BUT STAYS LOADED	CHECK/REPLACE MODE SWITCH ON RIGHT SIDE OF CASSETTE HOUSING AND HARD WIRE 4 WIRE PLUG CONNECTION.
PHILIPS	VR6695	N/A	WILL NOT REWIND AND EATS TAPES ON PLAYBACK	EXAMINE THE GEAR DIRECTLY BELOW MAIN DRIVE PULLEY. THIS IS ITEM# 141 ON THE BREAK DOWN.
PHILIPS	VR6695	N/A	ONLY REWINDS WHEN POWERED UP	CHECK FOR OPEN SOLENOID (PS00029)
PHILIPS	VR6695	N/A	NO POWER-INOPERABLE-NO FUNCTIONS OPERATE (MAYBE AFTER A SURGE OR LIGHTNING STRIKE)	CHECK Q102 - ALSO ADD 2 DIODES (MA165 - 5391100060) IN SERIES W/ANODE TO Q102-E & CATHODE TO PIN 3 (IC11)
PHILIPS	VR6895	N/A	WILL NOT REWIND AND EATS TAPES ON PLAYBACK	EXAMINE THE GEAR DIRECTLY BELOW MAIN DRIVE PULLEY. THIS IS ITEM# 141 ON THE BREAK DOWN.
PHILIPS	VR6895	N/A	DEW INDICATOR IS ON BUT VCR HAS NO DEW SENSOR	CHECK THE GROUND TO THE DEW INPUT (PIN 77) ON THE MICROPROCESSOR (IC6001)
PHILIPS	VR6895	N/A	ONLY REWINDS WHEN POWERED UP	CHECK FOR OPEN SOLENOID (PS00029)
PHILIPS	VR6895	N/A	BLOWS AC LINE FUSE IMMEDIATELY	CHECK F1001,D1001,C1004,Q1001,Q1002,D1015,D1005
PHILIPS	VR6895	N/A	BREAK LIFTER ARM WHEN UNLOADING	CHECK FOR BENT METAL TAPE FLAP OPENER (RIGHT FRONT
PHILIPS	VR6895	N/A	ERRATIC OPERATION-LOADS TAPE IN VCR THEN NOTHING-MAY BEGIN TO PLAY TAPE AND JUST STOP BUT STAYS LOADED	CHECK/REPLACE MODE SWITCH ON RIGHT SIDE OF CASSETTE HOUSING AND HARD WIRE 4 WIRE PLUG CONNECTION.
PHILIPS	VRS962	N/A	WRONG INFORMATION IN THE TIMER PROGRAMMING SCREEN WHEN REVIEWING SETTINGS	CHECK/REPLACE IC6001 (P/N# 483520917508)
PHILIPS	VRT222	N/A	WARBLE IN AUDIO DURING PLAYBACK OF LINEAR AUDIO - CAN BE INTERMITTENT - MOST NOTICED ON STEADY TONES	CHECK/REPLACE CAPSTAN MOTOR ASSY.
PHILIPS	VRT242	N/A	WARBLE IN AUDIO DURING PLAYBACK OF LINEAR AUDIO - CAN BE INTERMITTENT - MOST NOTICED ON STEADY TONES	CHECK/REPLACE CAPSTAN MOTOR ASSY.
PHILIPS	VRT262	N/A	WARBLE IN AUDIO DURING PLAYBACK OF LINEAR AUDIO - CAN BE INTERMITTENT - MOST NOTICED ON STEADY TONES	CHECK/REPLACE CAPSTAN MOTOR ASSY.
PHILIPS	VRT322	N/A	WARBLE IN AUDIO DURING PLAYBACK OF LINEAR AUDIO - CAN BE INTERMITTENT - MOST NOTICED ON STEADY TONES	CHECK/REPLACE CAPSTAN MOTOR ASSY.
PHILIPS	VRT342	N/A	WARBLE IN AUDIO DURING PLAYBACK OF LINEAR AUDIO - CAN BE INTERMITTENT - MOST NOTICED ON STEADY TONES	CHECK/REPLACE CAPSTAN MOTOR ASSY.
PHILIPS	VRT344	N/A	WARBLE IN AUDIO DURING PLAYBACK OF LINEAR AUDIO - CAN BE INTERMITTENT - MOST NOTICED ON STEADY TONES	CHECK/REPLACE CAPSTAN MOTOR ASSY.
PHILIPS	VRT364	N/A	WARBLE IN AUDIO DURING PLAYBACK OF LINEAR AUDIO - CAN BE INTERMITTENT - MOST NOTICED ON STEADY TONES	CHECK/REPLACE CAPSTAN MOTOR ASSY.
PHILIPS	VRT364	N/A	SAP CANNOT BE CHANGED WHEN A CASSETTE IS LOADED INTO UNIT	CHECK TO SEE IF J287 AND J286 ARE SHORTED TOGETHER
PHILIPS	VRT642	N/A	WARBLE IN AUDIO DURING PLAYBACK OF LINEAR AUDIO - CAN BE INTERMITTENT - MOST NOTICED ON STEADY TONES	CHECK/REPLACE CAPSTAN MOTOR ASSY.
PHILIPS	VRT662	N/A	SAP CANNOT BE CHANGED WHEN A CASSETTE IS LOADED INTO UNIT	CHECK TO SEE IF J287 AND J286 ARE SHORTED TOGETHER
PHILIPS	VRT662	N/A	WARBLE IN AUDIO DURING PLAYBACK OF LINEAR AUDIO - CAN BE INTERMITTENT - MOST NOTICED ON STEADY TONES	CHECK/REPLACE CAPSTAN MOTOR ASSY.
PHILIPS	VRT762	N/A	WARBLE IN AUDIO DURING PLAYBACK OF LINEAR AUDIO - CAN BE INTERMITTENT - MOST NOTICED ON STEADY TONES	CHECK/REPLACE CAPSTAN MOTOR ASSY.
PILOT	VCR905	N/A	WILL NOT ACCEPT TAPE	CHECK IC602
QUASAR	VA546XQ	N/A	WILL NOT TURN ON ONLY THE VCR LED ILLUMINATES	CHECK/REPLACE R1010,D1007,Q1006,Q1005,IC1001
QUASAR	VA546XQ	N/A	MULTIPLE COMPONENT FAILURE IN 5V & 12V SUPPLIES	ALWAYS REPLACE IC1001 WHEN REPLACING ANY COMPONENTS
QUASAR	VA546XQ	N/A	DEAD--NO CLOCK OR DISPLAY	CHECK Q1005,Q1006,D1007
QUASAR	VH5032	N/A	FIP LIGHTS-UNIT SHUTS DOWN	CHECK IC6002
QUASAR	VH5032	N/A	PIX JITTERS ON SPECIAL EFFECTS	CHECK V-LOCK ADJUSTMENT-WORN HEADS-PG SHIFTERS TR.FIX
QUASAR	VH5032	N/A	WILL NOT EJECT TAPE	CHECK DOOR SOLENOID
QUASAR	VH5032	N/A	SWIT. REVIEW,CUE/PAUSE DURING PLAY MODE	VOLTAGE LOW AT THE COLLECTOR OF Q6021 CHECK C6012
QUASAR	VH5032	N/A	PLAY MODE ACTIVATED UNIT GOES INTO REVIEW	REPLACE FAST FORWARD IDLER UNIT
QUASAR	VH5032	N/A	POWERS UP OK WILL NOT EJECT LOADING MOTORWONTENG	CHECK R1007
QUASAR	VH5032	N/A	UNIT INTM. SWITCHES BAck/FORTH FROM SLP SP	REPLACE IC2005
QUASAR	VH5032	N/A	UNIT STAYS IN VCR MODE WHEN POWERED UP	CHECK Q7021
QUASAR	VH5032	N/A	THIN WHITE HORINZ. LINE THUR PICTURE	CLEAN UNDER UPPER CYLND.
QUASAR	VH5032	N/A	INTERMITTENT NO COLOR REPLACING UPPER CYLINDER	UPPER CYL. INSTALLED 180 DEGREES OUT OF PHASE
QUASAR	VH5032	N/A	WASHED OUT VIDEO ON PLAYBACK AND TUNER	CHECK/REPLACE C3052
QUASAR	VH5032	N/A	WILL NOT RECORD OR PLAYBACK AUDIO	CHECK/REPLACE IC4003
QUASAR	VH5032	N/A	WHEN PUT INTOPLAY LOADING MOTOR CHATTERS CONTINU	REPLACE OR CLEAN MODE SELECT SWITCH
QUASAR	VH5032	N/A	SPEED JUMPS BACK & FORTH FROM SLP TO SP ON PB	CHECK FOR PROPER OPERATION OF THE AUDIO CONTROL HEAD
QUASAR	VH5032	N/A	RECORDING INTERMITTENT WHEN IN TIMER MODE	CHECK OR REPLACE THE SAFETY TAB SWITCH
QUASAR	VH5032	N/A	DEW SENSOR ON CONTINUOUSLY	CHECK AND REPLACE D6009
QUASAR	VH5032	N/A	NO CYLINDER CONTROL UNLOADS TAPE FROM POST	CHECK /REPLACE IC4
QUASAR	VH5032	N/A	NUMBER 11 BAND SWITCH CHANGES ALL CHANNELS BELOW	D7311 MAY BE LEAKY OR BREAKING DOWN
QUASAR	VH5032	N/A	DD CYLINDER NOT ROTATING EJECT SOLENOID NOT WORK	CHECK FOR OPEN Q1004
QUASAR	VH5032	N/A	GOES TO REVIEW WHEN PLACED IN PLAY	CHECK D6040 FOR SHORT TO GROUND
QUASAR	VH5032	N/A	EATS TAPE WILL NOT REWIND CORRECTLY	VERIFY THE LOCK COLLAR SHAFT IS NOT BENT
QUASAR	VH5032	N/A	TRACKING ADJUSTMENTS	MOST ACCURATELY PERFORMED IN SP MODE.
QUASAR	VH5032	N/A	FIP FILAMENT VOLTAGE OK NO FIP DISPLAY	CHECK R6005 AND R6006
QUASAR	VH5032	N/A	DIAGONAL LINES IN PIX OF SELF RECORDED TAPE	REPLACE C3023 SAME VALUE AS ONE REMOVED FROM BOARD
QUASAR	VH5032	N/A	AUDIO TONE THRU TV ON PLAYBACK SP SPEED ONLY	CHECK OR REPLACE IC4003
QUASAR	VH5032	N/A	EATS TAPE PLAY IDLER PROPERLY	REPLACE THE PLAY IDLER
QUASAR	VH5032	N/A	UNIT GOES FROM PLAY TO PAUSE AFTER REPLACING IC4	CHECK FOIL CONNECTION AROUND IC4
QUASAR	VH5032	N/A	NO COLOR IN PLAY BACK ONLY GOOD B&W	CHECK/REPLACE IC8002,LP00147
QUASAR	VH5032	N/A	TAPE DOOR WILL NOT CLOSE WITH TAPE INSERTED	TAPE FLAP DOOR OPENER HAS GOT BENT BACKWARDS.REPAIR.
QUASAR	VH5032	N/A	NO COLOR	ADJUST VCO,VXO--CHECK 3.58MHZ,4.2MHZ,629KHZ
QUASAR	VH5032	N/A	WON'T RECORD -- MANUAL OR OTR	CLEAN OR REPLACE ERASE PROTECT SWITCH
QUASAR	VH5032	N/A	INTERMITTENT AUDIO QUAVER IN PLAYBACK	REPLACE IC2002
QUASAR	VH5032	N/A	NO AUDIO FROM PLAY BACK OF SELF RECORDED TAPE	CHECK FOR 1KHZ SINEWAVE--RFEPL. C4029
QUASAR	VH5032	N/A	NO CAPSTAN OPERATION AFTER 1 TO 2 HOURS	CHECK FOR THERMAL BREAKDOWN OF IC2005
QUASAR	VH5032	N/A	WILL NOT GO INTO OTR TIMER RECORD MODES ONLY	CLEAN OR REPLACE THE MODE SELECT SWITCH
QUASAR	VH5032	N/A	ERRATIC FUNCTIONS	CHECK/CLEAN/REPLACE MODE SELECT SWITCH
QUASAR	VH5032	N/A	WHITE LINES FLASH IN VIDEO--STATIC IN AUDIO	REPLACE OR REPAIR DEMODULATOR MODULE
QUASAR	VH5141	N/A	FIP INDCATES PROPER MODE CAPSTAN FAILS TO RUN	CHECK Q2005
QUASAR	VH5141	N/A	NO VIDEO-TUNER LEDS AND CHANNEL CHANGE OK	CHECK R1023
QUASAR	VH5141	N/A	FF/CUE WILL NOT RELEASE UNTIL STOP IS PRESSED	REPLACE IC2601
QUASAR	VH5141	N/A	UNIT POWERS UP NO PLAY FF REWIND	CHECK/REPLACE C6032
QUASAR	VH5141	N/A	INTERMITTENTLY SHUTS DOWN	CHECK FOR DEFECTIVE DD CYLINDER
QUASAR	VH5141	N/A	NO COLOR	ADJUST VCO,VXO--CHECK 3.58MHZ,4.2MHZ,629KHZ
QUASAR	VH5141	N/A	TRACKING ADJUSTMENTS	MOST ACCURATELY PERFORMED IN SP MODE.
QUASAR	VH5141	N/A	STOPS OR SHUTDOWN AFTER 1 TO 2 HOURS OF PLAYING	REPLACE THE CAPSTAN HOUSING
QUASAR	VH5141	N/A	PLAY ENGAGED,LOADS,COUNTER FAILS TO COUNT,STOPS	Q6020,D6022
QUASAR	VH5141	N/A	TAPE LOAD/UNLOAD SLUGGISH-LEAVE TAPE HANGING OUT	CHECK Q1013 AND D1022 FOR SHORTS OR OPENS
QUASAR	VH5141	N/A	WHILE PLAYING GOES INTO REVIEW	CHECK/REPLACE IC6001
QUASAR	VH5141	N/A	UNIT WILL NOT ALWAYS LOAD	CHECK 'C' RING WHICH HOLDS THE CAM GEAR IN PLACE
QUASAR	VH5141	N/A	WILL NOT RECORD OR PLAYBACK AUDIO	CHECK/REPLACE IC4003
QUASAR	VH5141	N/A	WON'T RECORD -- MANUAL OR OTR	CLEAN OR REPLACE ERASE PROTECT SWITCH
QUASAR	VH5141	N/A	WILL NOT TIME RECORD	CLEAN THE POINTS ON AND/OR REPLACE THE SAFETY SWITCH
QUASAR	VH5141	N/A	WILL NOT REWIND OR FAST FORWARD - NO CAPSTAN OPERATIONS	CHECK/REPLACE Q2005
QUASAR	VH5141	N/A	ERRATIC FUNCTIONS	CHECK/CLEAN/REPLACE MODE SELECT SWITCH
QUASAR	VH5141	N/A	PIX JITTERS ON SPECIAL EFFECTS	CHECK V-LOCK ADJUSTMENT-WORN HEADS-PG SHIFTERS TR.FIX
QUASAR	VH5141	N/A	INTERMITTENT COLOR SMEAR AND WHITE LINES IN PB	CHECK Q1009,Q1010 ESPECIALLY IF IC1001 IS SHORTED
QUASAR	VH5141	N/A	TAPE LOADS IS IMMEDIATELY EJECTED	CHECK D6013 FOR LEAKAGE
QUASAR	VH5141	N/A	WILL NOT GO INTO RECORD MAY CONT UNLOAD AND LOAD	REPLACE THE MODE SELECT SWITCH
QUASAR	VH5141	N/A	INTERMITTENT NORMAL PIX TO SNOW AFTER SEVERAL HO	REPLACE IC2001
QUASAR	VH5141	N/A	NO COLOR IN PLAYBACK LIGHT HORINZ. BAR BEHIND VI	CHECK C5 IN THE POWER SUPPLY
QUASAR	VH5141	N/A	NO FIPS OPERATION CYLD. MOTOR RUNS ALL THE TIME	IF POWER SUPPLY VOLTAGES ARE LOW CHECK D1006
QUASAR	VH5141	N/A	LEAVES THE TAPE HANGING FROM EJECTED CASSETTE	CHECK THE FELT ON THE TENSION BAND UNIT
QUASAR	VH5141	N/A	EXCESSIVE BRIGHTNESS IN PLAYBACK;E-E PIX OK	ADJUST WHITE CLIP R3101 (REFER TO MANUAL)
QUASAR	VH5141	N/A	REACTION TIME TO ALL FUNCTIONS IS SLOW	CHECK MODE SELECT SWITCH
QUASAR	VH5141	N/A	PLAYS HALF OF TAPE CAPSTAN DRIVE IC HOT	REPLACE CAPSTAN BEARING ASSEMBLY
QUASAR	VH5141	N/A	ERRATIC FUNCTIONS--PLAY>STOP RESULTS PLAY>REWIND	CHECK FOR DIRTY MODE SELECT SWITCH OR SWITCH TIMING.
QUASAR	VH5141	N/A	CAPSTAN STOPS AFTER 1/2 HOUR--IC VERY HOT!!!	CHECK CAPSTAN BEARINGS OR FLYWHEEL FOR SCARS
QUASAR	VH5141	N/A	LOADING MOTOR WILL NOT RUN ALL FUNCT INOPERABLE	CHECK Q6009
QUASAR	VH5141	N/A	TAPE LEFT HANGING FROM CASSETTE;IDLER OK	CHECK MODE SELECT SWITCH
QUASAR	VH5141	N/A	POWER BUTTON INOPERATIVE-WILL NOT TURN OFF	CHECK D6049 (MAY CHECK OK IN CIRCUIT)
QUASAR	VH5141	N/A	NO POWER NO DISPLAY FUSE OK	CHECK FOR DEFECTIVE Q1 INTHE POWER SUPPLY
QUASAR	VH5141	N/A	IMMEDIATELY SHUTS OFF WITH POWER UP OF UNIT	CHECK OR REPLACE IC7001,21011,21013
QUASAR	VH5141	N/A	COMPLETELY DEAD	CHECK R1001,R1034,R1006 FOR OPEN CONDITIONS
QUASAR	VH5141	N/A	LOADS TAPE AROUND HEAD WHEN EITHER FF/REW PUSHED	REPLACE MODE SELECT SWITCH
QUASAR	VH5141	N/A	ERRATIC CAPSTAN MOTOR OPERATION	CHECK/REPLACE IC2601
QUASAR	VH5141	N/A	WHEN PLAY BUTTON IS PRESSED ALL DISP. SEG. GOOUT	CHECK Q1001
QUASAR	VH5141	N/A	DEAD SET BUT NO FUSES BLOWN	CHECK/REPLACE Q1001,D1007 AND D1005
QUASAR	VH5141	N/A	DD CYLND.SHUTS OFF AFTER LOADING IS FINAL	REPLACE D6054
QUASAR	VH5141	N/A	VERY BRIGHT FIP	CHECK D1015 IN POWER SUPPLY
QUASAR	VH5141	N/A	NO FIP DISPLAY	CHECK R1030
QUASAR	VH5141	N/A	HORIZ. ROLLING LINES IN PIX WITH VCR OFF	CHECK OR REPLACE THE VHF BLOCK
QUASAR	VH5141	N/A	GARBLED AUDIO IN LP AND SLP	CHECK IC4705,PINCH ROLLER,CLUTCH ASSY.;IDLER
QUASAR	VH5141	N/A	PLAYS 3 TO 4 SECONDS THEN GOES TO STOP	CHECK D6021 D6022 D6023 AND D6024 FOR LEAKY SHORTCOND
QUASAR	VH5141	N/A	PLAYBACK/RECORD ONLY IN SP LP&SLP CAPSTAN QUIVER	READJUSTMENT OF THE FG HEAD
QUASAR	VH5141	N/A	SLUGGISH AUDIO;NOISE BARS IN PIX;WILL NOT ADJUST	CHECK THE CAPSTAN IC OR FLYWHEEL BEARINGS
QUASAR	VH5153	N/A	WEAK AUDIO (PLAYBACK ONLY)	CHECK C4014
QUASAR	VH5153	N/A	DEAD WITH OPEN FUSE	CHECK D1001,Q1001,R1003
QUASAR	VH5153	N/A	NO EE OR VV VIDEO AUDIO OK	CHECK/REPLACE IC3101
QUASAR	VH5153	N/A	GARBLED AUDIO IN LP AND SLP	CHECK PINCH ROLLER,CLUTCH ASSY.;IDLER
QUASAR	VH5153	N/A	NO COLOR	ADJUST VCO,VXO--CHECK 3.58MHZ,4.2MHZ,629KHZ
QUASAR	VH5153	N/A	NO COLOR IN PLAY BACK ONLY	REPLACE IC3502 ON THE HEAD AMP CBA
QUASAR	VH5153	N/A	NO AUDIO	CHECK/REPLACE Q7010 & Q7002
QUASAR	VH5153	N/A	INTERMITTENTLY STOPS PLAYING W/KNOWN GOOD TAPE	CHECK Q1552 (SUPPLY PHOTO XSTR)
QUASAR	VH5153	N/A	EXCESSIVE WOW AND FLUTTER	CHECK/REPLACE C2004 (BREAKING DOWN UNDER LOAD OR HIGH ESR)
QUASAR	VH5153	N/A	AFTER POWER IS APPLIED CAPSTAN SPINS FORFEW SECS	CHECK/ REPLACE Q6003 IN MICROPROCESSOR CIRCUIT
QUASAR	VH5153	N/A	VIDEO FROM RF VIDEO OUTLOOKS SCRAMBLED	CHECK VIDEO SIGNAL ON BOTH SIDES OF C3014
QUASAR	VH5153	N/A	UNIT TICKS WHEN PLUGGED IN NO FIP	R1039
QUASAR	VH5153	N/A	FAILURE TO PASS LEAKAGE CURRENT HOT CHECK	CHECK OR REPLACE C1005
QUASAR	VH5153	N/A	SNOWY PIX IN PLAYBACK ONLY AUDIO OK	CHECK Q3001
QUASAR	VH5153	N/A	WILL NOT RECORD WHEN TIMER IS SET	CHECK/CLEAN ERASE PROTECT SWITCH CONTACTS
QUASAR	VH5153	N/A	WON'T POWER UP--DRUM RUNS CONTINUOUSLY	REPLACE IC6001 (MN15846VRG)
QUASAR	VH5153	N/A	TRACKING ADJUSTMENTS	MOST ACCURATELY PERFORMED IN SP MODE.
QUASAR	VH5153	N/A	NO POWER UP--FIP OK,POWER SUPPLY OK	CK PIN #16 OF IC6001 (4-5V)--IF LOW,CK C6009
QUASAR	VH5153	N/A	PIX JITTERS ON SPECIAL EFFECTS	CHECK V-LOCK ADJUSTMENT-WORN HEADS-PG SHIFTERS TR.FIX
QUASAR	VH5153	N/A	PUSH PLAY AND TAPE GOES TO REWIND	CHECK/REPLACE END SENSORS
QUASAR	VH5153	N/A	SQUEL FROM THE POWER SUPP WHEN PLUGGED IN	CHECK D1023
QUASAR	VH5153	N/A	WON'T RECORD -- MANUAL OR OTR	CLEAN OR REPLACE ERASE PROTECT SWITCH
QUASAR	VH5153	N/A	NO COLOR ON PLAYBACK OF PRE-RECORDED TAPES	CHECK/REPLACE IC8101 (MN6163)
QUASAR	VH5153	N/A	TOP & BOTTOM 2' OF PIX. OK CENTER SNOWY	CHECK OR REPLACE IC8102
QUASAR	VH5153	N/A	WHEN PLAY IS PRESSED,VCR RUNS FOR 2-5 SECONDS THEN SHUTS OFF-NEVER SWITCHES FROM TUNER TO VCR-LOADING MOTOR RUNS ON	CHECK/REPLACE MODE SELECT SWITCH
QUASAR	VH5153	N/A	POWER SUPPLY TICKS WHEN PLUGGED IN AND ALL SECONDARY VOLTAGES ARE LOW.	CHECK R1002 (680k) FOR OPEN
QUASAR	VH5153	N/A	REDUCED CLOCK & DAY BRILLIANCE	CHECK R1215
QUASAR	VH5153	N/A	STARTS PLAYING THEN STOPS;COUNTER DOESN'T WORK	CHECK IC1551
QUASAR	VH5153	N/A	NO TRACKING CONTROL MAY LOCK IN BRIEFLY	CHECK/REPLACE IC2002
QUASAR	VH5153	N/A	POWERS UP-LOADS TAPE-NO PLAY,REC,EJECT,FF,REW	REPLACE IC7501
QUASAR	VH5153	N/A	CAPSTAN MOTOR OSCILLATES BACK & FORTH	REPLACE IC2002
QUASAR	VH5153	N/A	ALL MODES OPERATIONAL NO FIP DISPLAY	CHECK FILAMENT VOLT.MISSING CHECKPINS7&8 OF T1001
QUASAR	VH5153	N/A	RF INTERFERENCE IN PIX ON TUNER/PLAYBACK--VIDEO OUT SIG. OK	CHECK ALL SWITCHING DIODES IN RF MODULATOR CIRCUIT
QUASAR	VH5153	N/A	AFTER POWER IS APPLIED CAPSTAN SPINS FOR A FEW S	CHECK / REPLACE Q6003 IN MICROPROCESSOR CIRCUIT
QUASAR	VH5153	N/A	NO AUTO STOP AT END OF TAPE IN PLAY FAST FOR REW	CHECK/REPLACE Q6008
QUASAR	VH5153	N/A	CAPSTAN MOTOR RUNS ABOUT 8SEC. THEN SHUTS DOWN	CHECK R6070
QUASAR	VH5153	N/A	DISTORTION OF CASSETTE TRAY SIDE PLATE	CHECK R6070 RC00043,PLOO144,IC6001
QUASAR	VH5156YQ	N/A	STARTS PLAYING THEN STOPS;COUNTER DOESN'T WORK	CHECK IC1551
QUASAR	VH5156YQ	N/A	TRACKING ADJUSTMENTS	MOST ACCURATELY PERFORMED IN SP MODE.
QUASAR	VH5156YQ	N/A	WILL NOT RECORD WHEN TIMER IS SET	CHECK/CLEAN ERASE PROTECT SWITCH CONTACTS
QUASAR	VH5156YQ	N/A	NO COLOR ON PLAYBACK OF PRE-RECORDED TAPES	CHECK/REPLACE IC8101 (MN6163)
QUASAR	VH5156YQ	N/A	PIX JITTERS ON SPECIAL EFFECTS	CHECK V-LOCK ADJUSTMENT-WORN HEADS-PG SHIFTERS TR.FIX
QUASAR	VH5156YQ	N/A	POWER SUPPLY TICKS WHEN PLUGGED IN AND ALL SECONDARY VOLTAGES ARE LOW.	CHECK R1002 (680k) FOR OPEN
QUASAR	VH5156YQ	N/A	NO COLOR	ADJUST VCO,VXO--CHECK 3.58MHZ,4.2MHZ,629KHZ
QUASAR	VH5156YQ	N/A	DEAD WITH OPEN FUSE	CHECK D1001,Q1001,R1003
QUASAR	VH5156YQ	N/A	GARBLED AUDIO IN LP AND SLP	CHECK PINCH ROLLER,CLUTCH ASSY.;IDLER
QUASAR	VH5156YQ	N/A	WON'T RECORD -- MANUAL OR OTR	CLEAN OR REPLACE ERASE PROTECT SWITCH
QUASAR	VH5156YQ	N/A	EXCESSIVE WOW AND FLUTTER	CHECK/REPLACE C2004 (BREAKING DOWN UNDER LOAD OR HIGH ESR)
QUASAR	VH5156YQ	N/A	PUSH PLAY AND TAPE GOES TO REWIND	CHECK/REPLACE END SENSORS
QUASAR	VH5156YQ	N/A	NO FUNCTIONS--NO CLOCK--FUSE GOOD	CHECK FOR SHORTED D1007
QUASAR	VH5156YQ	N/A	NO DISPLAY DD CYLINDER CONTINUOUSLY SPINNING	REPLACE D1008 IF SHORTED
QUASAR	VH5156YQ	N/A	NO OPER.EXCEPT CLOCK-SHUTS OFF AFTER 15-20 SECS.	CHECK D1203,Q1203 (+12V UNSWITCHED VOLTAGE)
QUASAR	VH5156YQ	N/A	NO TURNER RECEPTION	REPLACE R37 & IC7001 IF DEFECTIVE
QUASAR	VH5156YQ	N/A	AFTER POWER IS APPLIED CAPSTAN SPINS FORFEW SECS	CHECK/ REPLACE Q6003 IN MICROPROCESSOR CIRCUIT
QUASAR	VH5156YQ	N/A	WON'T POWER UP--DRUM RUNS CONTINUOUSLY	REPLACE IC6001 (MN15846VRG)
QUASAR	VH5156YQ	N/A	WHEN PLAY IS PRESSED,VCR RUNS FOR 2-5 SECONDS THEN SHUTS OFF-NEVER SWITCHES FROM TUNER TO VCR-LOADING MOTOR RUNS ON	CHECK/REPLACE MODE SELECT SWITCH
QUASAR	VH5156YQ	N/A	INTERMITTENTLY STOPS PLAYING W/KNOWN GOOD TAPE	CHECK Q1552 (SUPPLY PHOTO XSTR)
QUASAR	VH5156YQ	N/A	DISTORTION OF CASSETTE TRAY SIDE PLATE	CHECK R6070 RC00043,PLOO144,IC6001
QUASAR	VH5156YQ	N/A	CAPSTAN MOTOR RUNS ABOUT 8SEC. THEN SHUTS DOWN	CHECK R6070
QUASAR	VH5156YQ	N/A	NO FIP DISPLAY	CHECK 1015
QUASAR	VH5156YQ	N/A	CANNOT TUNE STATIONS,PLAYS TAPES OK.	IC7001 (AN5070) R7037
QUASAR	VH5156YQ	N/A	NO POWER FUSE OPENS IMMED. WHEN UNIT IS PLUG IN	CHECK /REPLACE D1001
QUASAR	VH5163	N/A	RF RADIATION LINES IN PICTURE - GETS WORSE WHILE UNIT IS GOING INTO PLAY (WHEN MOTORS ARE RUNNING) BEFORE VCR MODE	CHECK/REPLACE C7,C9,C10,C14,C15,C16,C17,C18,C19,C23
QUASAR	VH5180	N/A	WILL NOT REWIND AND EATS TAPES ON PLAYBACK	EXAMINE THE GEAR DIRECTLY BELOW MAIN DRIVE PULLEY. THIS IS ITEM# 141 ON THE BREAK DOWN.
QUASAR	VH5180	N/A	FAILURE OF SOLENOID	REPLACE SOLENOID AND MODE SELECT SW.-ADD A 1k TO THE END OF R6100 AWAY FROM IC W/1uF AT OTHER END TO GRD.
QUASAR	VH5180	N/A	ERRATIC OPERATION-LOADS TAPE IN VCR THEN NOTHING-MAY BEGIN TO PLAY TAPE AND JUST STOP BUT STAYS LOADED	CHECK/REPLACE MODE SWITCH ON RIGHT SIDE OF CASSETTE HOUSING AND HARD WIRE 4 WIRE PLUG CONNECTION.
QUASAR	VH5200	N/A	RF INTERFERENCE IN PIX ON TUNER/PLAYBACK--VIDEO OUT SIG. OK	CHECK ALL SWITCHING DIODES IN RF MODULATOR CIRCUIT
QUASAR	VH5251	N/A	WEAK AUDIO (PLAYBACK ONLY)	CHECK C4014
QUASAR	VH5251	N/A	NO AUDIO	CHECK/REPLACE Q7010 & Q7002
QUASAR	VH5251	N/A	SQUEL FROM THE POWER SUPP WHEN PLUGGED IN	CHECK D1023
QUASAR	VH5251	N/A	VIDEO FROM RF VIDEO OUTLOOKS SCRAMBLED	CHECK VIDEO SIGNAL ON BOTH SIDES OF C3014
QUASAR	VH5251	N/A	TOP & BOTTOM 2' OF PIX. OK CENTER SNOWY	CHECK OR REPLACE IC8102
QUASAR	VH5251	N/A	PUSH PLAY AND TAPE GOES TO REWIND	CHECK/REPLACE END SENSORS
QUASAR	VH5251	N/A	TRACKING ADJUSTMENTS	MOST ACCURATELY PERFORMED IN SP MODE.
QUASAR	VH5251	N/A	POWER SUPPLY TICKS WHEN PLUGGED IN AND ALL SECONDARY VOLTAGES ARE LOW.	CHECK R1002 (680k) FOR OPEN
QUASAR	VH5251	N/A	NO COLOR	ADJUST VCO,VXO--CHECK 3.58MHZ,4.2MHZ,629KHZ
QUASAR	VH5251	N/A	CAPSTAN MOTOR RUNS ABOUT 8SEC. THEN SHUTS DOWN	CHECK R6070
QUASAR	VH5251	N/A	AFTER POWER IS APPLIED CAPSTAN SPINS FOR A FEW S	CHECK / REPLACE Q6003 IN MICROPROCESSOR CIRCUIT
QUASAR	VH5251	N/A	NO AUTO STOP AT END OF TAPE IN PLAY FAST FOR REW	CHECK/REPLACE Q6008
QUASAR	VH5251	N/A	WON'T RECORD -- MANUAL OR OTR	CLEAN OR REPLACE ERASE PROTECT SWITCH
QUASAR	VH5251	N/A	CAPSTAN MOTOR OSCILLATES BACK & FORTH	REPLACE IC2002
QUASAR	VH5251	N/A	INTERMITTENTLY STOPS PLAYING W/KNOWN GOOD TAPE	CHECK Q1552 (SUPPLY PHOTO XSTR)
QUASAR	VH5251	N/A	WHEN PLAY IS PRESSED,VCR RUNS FOR 2-5 SECONDS THEN SHUTS OFF-NEVER SWITCHES FROM TUNER TO VCR-LOADING MOTOR RUNS ON	CHECK/REPLACE MODE SELECT SWITCH
QUASAR	VH5251	N/A	EXCESSIVE WOW AND FLUTTER	CHECK/REPLACE C2004 (BREAKING DOWN UNDER LOAD OR HIGH ESR)
QUASAR	VH5251	N/A	NO COLOR IN PLAY BACK ONLY	REPLACE IC3502 ON THE HEAD AMP CBA
QUASAR	VH5251	N/A	STARTS PLAYING THEN STOPS;COUNTER DOESN'T WORK	CHECK IC1551
QUASAR	VH5251	N/A	WON'T POWER UP--DRUM RUNS CONTINUOUSLY	REPLACE IC6001 (MN15846VRG)
QUASAR	VH5251	N/A	UNIT TICKS WHEN PLUGGED IN NO FIP	R1039
QUASAR	VH5251	N/A	GARBLED AUDIO IN LP AND SLP	CHECK PINCH ROLLER,CLUTCH ASSY.;IDLER
QUASAR	VH5251	N/A	NO EE OR VV VIDEO AUDIO OK	CHECK/REPLACE IC3101
QUASAR	VH5251	N/A	FAILURE TO PASS LEAKAGE CURRENT HOT CHECK	CHECK OR REPLACE C1005
QUASAR	VH5251	N/A	NO COLOR ON PLAYBACK OF PRE-RECORDED TAPES	CHECK/REPLACE IC8101 (MN6163)
QUASAR	VH5251	N/A	NO COLOR ON PLAYBACK OF PRE-RECORDED TAPES	CHECK/REPLACE IC8101 (MN6163)
QUASAR	VH5251	N/A	PIX JITTERS ON SPECIAL EFFECTS	CHECK V-LOCK ADJUSTMENT-WORN HEADS-PG SHIFTERS TR.FIX
QUASAR	VH5251	N/A	AFTER POWER IS APPLIED CAPSTAN SPINS FORFEW SECS	CHECK/ REPLACE Q6003 IN MICROPROCESSOR CIRCUIT
QUASAR	VH5251	N/A	DEAD WITH OPEN FUSE	CHECK D1001,Q1001,R1003
QUASAR	VH5251	N/A	SNOWY PIX IN PLAYBACK ONLY AUDIO OK	CHECK Q3001
QUASAR	VH5251	N/A	REDUCED CLOCK & DAY BRILLIANCE	CHECK R1215
QUASAR	VH5251	N/A	NO POWER UP--FIP OK,POWER SUPPLY OK	CK PIN #16 OF IC6001 (4-5V)--IF LOW,CK C6009
QUASAR	VH5251	N/A	ALL MODES OPERATIONAL NO FIP DISPLAY	CHECK FILAMENT VOLT.MISSING CHECKPINS7&8 OF T1001
QUASAR	VH5251	N/A	POWERS UP-LOADS TAPE-NO PLAY,REC,EJECT,FF,REW	REPLACE IC7501
QUASAR	VH5251	N/A	NO TRACKING CONTROL MAY LOCK IN BRIEFLY	CHECK/REPLACE IC2002
QUASAR	VH5251	N/A	DISTORTION OF CASSETTE TRAY SIDE PLATE	CHECK R6070 RC00043,PLOO144,IC6001
QUASAR	VH5251	N/A	WILL NOT RECORD WHEN TIMER IS SET	CHECK/CLEAN ERASE PROTECT SWITCH CONTACTS
QUASAR	VH5261	N/A	CAPSTAN AND DRUM MOTORS WILL NOT RUN	CHECK FOR OPEN PR1 ON CAPSTAN/DRUM MOTOR DRIVE CBA
QUASAR	VH5261	N/A	TRACKING ADJUSTMENTS	MOST ACCURATELY PERFORMED IN SP MODE.
QUASAR	VH5261	N/A	DRUM SERVO SPEED IS TOO FAST-SLOWING DRUM DOWN BY HAND WILL CAUSE A PICTURE TO APPEAR.	CHECK C2010 AND C2011 FOR LEAKAGE/OPEN/SHORT
QUASAR	VH5261	N/A	DEAD WITH OPEN FUSE	CHECK D1001,Q1001,R1003
QUASAR	VH5261	N/A	DEAD	CHECK/REPLACE D1014 AND D1010 (MAY CHECK GOOD)
QUASAR	VH5261	N/A	NO PICTURE DURING PLAYBACK-ONLY GREY SCREEN	CHECK/REPLACE C3009 FOR SHORT
QUASAR	VH5261	N/A	RF RADIATION LINES IN PICTURE - GETS WORSE WHILE UNIT IS GOING INTO PLAY (WHEN MOTORS ARE RUNNING) BEFORE VCR MODE	CHECK/REPLACE C7,C9,C10,C14,C15,C16,C17,C18,C19,C23
QUASAR	VH5261	N/A	NO PLAYBACK VIDEO AND APPEARS THAT HEADS ARE DIRTY	CHECK/REPLACE C3003 FOR SHORT
QUASAR	VH5261	N/A	NO FIP LOADING MOTOR ENGAGES OK	CHECK/REPLACE C1020 C1021 L1005
QUASAR	VH5261	N/A	DEAD	CHECK/REPLACE Q1001 AND IC1001
QUASAR	VH5261	N/A	QUITS PLAYING & SQUELS FROM POWER SUPPLY	CHECK/REPLACE FILTER CAP C1006
QUASAR	VH5261	N/A	POOR CAPSTAN SPEED OR AUDIO QUIVER ON SP AND CAPSTAN PULSATES BACK AND FORTH ON LP AND SLP	CHECK/REPLACE C1015,C1016,C1018 AND C1019 IN POWER SUPPLY
QUASAR	VH5261	N/A	HORZ LINES-DRUM MOTOR RUNNING TOO FAST	REPLACE DD CYL. MOTOR
QUASAR	VH5261	N/A	NO AUDIO FROM TUNER-PLAYBACK AUDIO OK	REPL. IC4001
QUASAR	VH5261	N/A	WON'T RECORD -- MANUAL OR OTR	CLEAN OR REPLACE ERASE PROTECT SWITCH
QUASAR	VH5261	N/A	GARBLED AUDIO IN LP AND SLP	CHECK PINCH ROLLER,CLUTCH ASSY.;IDLER
QUASAR	VH5261	N/A	LOADING MOTOR SLOW OR SLUGGISH	CHECK/REPLACE C1015 OR C1016
QUASAR	VH5261	N/A	NO COLOR	ADJUST VCO,VXO--CHECK 3.58MHZ,4.2MHZ,629KHZ
QUASAR	VH5261	N/A	NO PICTURE THRU THE TUNER BUT PLAYS TAPE OK	CHECK/REPLACE IC7001
QUASAR	VH5261	N/A	PICTURE GETS DARKER OR LIGHTER ON PLAYBACK ONLY AND MAY ALSO LOSE COLOR	CHECK/RESOLDER GROUND CONNECTIONS ON R3122
QUASAR	VH5261	N/A	UNIT ACCEPTS TAPE BUT NO OTHER FUNCTIONS WILL WORK	CHECK/REPLACE LED SENSOR LAMP UNIT
QUASAR	VH5261	N/A	WOW & FLUTTER MOSTLY IN SLP SPEED	CHECK/REPLACE PINCH ROLLER
QUASAR	VH5261	N/A	NO DRUM/NO CAPSTAN	CHECK PR1 (CIRCUIT PROTECTOR) MOTOR DRIVE BOARD
QUASAR	VH5261	N/A	PIX JITTERS ON SPECIAL EFFECTS	CHECK V-LOCK ADJUSTMENT-WORN HEADS-PG SHIFTERS TR.FIX
QUASAR	VH5261	N/A	DEW INDICATOR ILLUMINATES AND UNIT SHUTS DOWN	LOOSE CONNECTIONS ONTHE P3 PLUG
QUASAR	VH5261	N/A	VCR DOESN'T ERASE OLD AUDIO	CHECK/REPLACE C4023
QUASAR	VH5261	N/A	COLOR FADES IN AND OUT	CHECK/REPLACE UPPER CYLINDER UNIT
QUASAR	VH5262	N/A	NO VIDEO - LOOKS LIKE A BAD VIDEO HEAD - AUDIO IS NORMAL	CHECK/REPLACE C3009 FOR SHORT
QUASAR	VH5270	N/A	PIX JITTERS ON SPECIAL EFFECTS	CHECK V-LOCK ADJUSTMENT-WORN HEADS-PG SHIFTERS TR.FIX
QUASAR	VH5270	N/A	NO FIP D1205 ON MAIN PWB BEING DRIVEN BEYOND TOL	CHECK C1018 FOR SHORTED CONDITION
QUASAR	VH5270	N/A	INTERMITTENT LOW NO AUDIO IN E/E PLAYBACK AUD,OK	REPLACE IC4001
QUASAR	VH5270	N/A	NO CYLINDER OR CAPSTAN ACTION UNIT SHUTS DOWN	CHECK ICP-F38 (PR206)FOR OPEN CONDITION
QUASAR	VH5270	N/A	NO COLOR	ADJUST VCO,VXO--CHECK 3.58MHZ,4.2MHZ,629KHZ
QUASAR	VH5270	N/A	NO TUNER VIDEO BUT PLAYS A TAPE OK	CHECK/REPLACE L708,R721 AND C723
QUASAR	VH5270	N/A	NO DISPLAY AND NO FUSES BLOWN	CHECK/REPLACE C1015 AND C1016 (330uF @ 16v)
QUASAR	VH5270	N/A	TRACKING PROBLEMS IN SP MODE AND 'DONALD DUCK' IN LP AND SLP MODES	CHECK/REPLACE C2023 FOR SHORT
QUASAR	VH5270	N/A	WON'T RECORD -- MANUAL OR OTR	CLEAN OR REPLACE ERASE PROTECT SWITCH
QUASAR	VH5270	N/A	FLOURESCENT DISPLAY VERY ERRATIC OR OUT COMPLETELY	CHECK/REPLACE C1004
QUASAR	VH5270	N/A	WHEN UNIT IS PLUGGED IN,CAPSTAN RUNS 4-5 SECONDS AND SHUTS DOWN.	CHECK/REPLACE D1008 AND R1010
QUASAR	VH5270	N/A	WOW & FLUTTER MOSTLY IN SLP SPEED	CHECK/REPLACE PINCH ROLLER
QUASAR	VH5270	N/A	TV/VCR FUNCTIONS DOESN'T WORK BUT INDICATOR DOES LIGHT IN THE FIP DISPLAY	CHECK/REPLACE IC7601
QUASAR	VH5270	N/A	SUPPLY REEL STARTS TURNING WHEN UNIT IS PLUGGED	CHECK/REPLACE R1010 D1008 C1011
QUASAR	VH5270	N/A	CAPSTAN MOTOR FLIP FLOPS BACK AND FORTH	CHECK IC8101
QUASAR	VH5270	N/A	DEAD WITH NO BLOWN FUSE OR REGULATOR TRANSISTOR	CHECK/REPLACE D1007 FOR SHORT (6.2V ZENER)
QUASAR	VH5270	N/A	DD CYLINDER RUNS FOR ABOUT 1 MINUTE - CHANNEL NUMBERS CHANGE BUT RECEIVES ONLY SNOW	CHECK/REPLACE D1008 AND R1010
QUASAR	VH5270	N/A	SNOW TO NORMAL PIX ON SELF RECORDED TAPES	CHECK CONNECTIONS ON IC2001 (ESPEC. PIN #2)
QUASAR	VH5270	N/A	CAPSTAN SPINS A FEW TIMES THEN UNIT SHUTS DOWN	CHECK /REPLACE R1010 Q606
QUASAR	VH5270	N/A	AFTER UNIT RUNS FOR 1/2 TO 1 HOUR, DISPLAY GOES OUT AND VCR LOCKS UP - WON'T TAKE ANY COMMANDS	CHECK/REPLACE IC7502 (MN1280-R) RESET IC
QUASAR	VH5270	N/A	GARBLED AUDIO IN LP AND SLP	CHECK PINCH ROLLER,CLUTCH ASSY.;IDLER
QUASAR	VH5270	N/A	GARBLED AUDIO-TUNER AUDIO NOT SWITCHING ON P.B.	REPLACE IC4001
QUASAR	VH5270	N/A	ONE TICK FROM POWER SUPPLY-NO DISPLAY-NO POWER	CHECK PR1001,L1003,D1011,C1015 AND C1016
QUASAR	VH5270	N/A	SUPPLY REELS START TURNING AS SOON AS UNIT IS PLUGGED IN BUT WILL NOT STAY ON - WILL NOT LOAD CASSETTE	CHECK/REPLACE R1010,D1008 AND C1011
QUASAR	VH5270	N/A	DRUM MOTOR WILL NOT RUN	CHECK/REPLACE IC2603
QUASAR	VH5270	N/A	PICTURE WOULD GO FROM GOOD TO SNOW-GOOD TO SNOW	CHECK/REPLACE C2023
QUASAR	VH5270	N/A	DEAD SET AND SHORT ON THE 5 VOLT LINE	CHECK/REPLACE C3137 AND PR1001
QUASAR	VH5270	N/A	TRACKING ADJUSTMENTS	MOST ACCURATELY PERFORMED IN SP MODE.
QUASAR	VH5270	N/A	CAPSTAN SPINS THEN POWER SHUTS OFF (AT POWER UP)	CHECK IC6001 AND IC6002
QUASAR	VH5270	N/A	POWER SUPPLY IS TICKING	CHECK D1007 FOR SHORT OR LEAKAGE
QUASAR	VH5280	N/A	FAILURE OF SOLENOID	REPLACE SOLENOID AND MODE SELECT SW.-ADD A 1k TO THE END OF R6100 AWAY FROM IC W/1uF AT OTHER END TO GRD.
QUASAR	VH5280	N/A	WILL NOT REWIND AND EATS TAPES ON PLAYBACK	EXAMINE THE GEAR DIRECTLY BELOW MAIN DRIVE PULLEY. THIS IS ITEM# 141 ON THE BREAK DOWN.
QUASAR	VH5280	N/A	ERRATIC OPERATION-LOADS TAPE IN VCR THEN NOTHING-MAY BEGIN TO PLAY TAPE AND JUST STOP BUT STAYS LOADED	CHECK/REPLACE MODE SWITCH ON RIGHT SIDE OF CASSETTE HOUSING AND HARD WIRE 4 WIRE PLUG CONNECTION.
QUASAR	VH5290	N/A	BLOWS AC LINE FUSE IMMEDIATELY	CHECK F1001,D1001,C1004,Q1001,Q1002,D1015,D1005
QUASAR	VH5290	N/A	ERRATIC OPERATION-LOADS TAPE IN VCR THEN NOTHING-MAY BEGIN TO PLAY TAPE AND JUST STOP BUT STAYS LOADED	CHECK/REPLACE MODE SWITCH ON RIGHT SIDE OF CASSETTE HOUSING AND HARD WIRE 4 WIRE PLUG CONNECTION.
QUASAR	VH5290	N/A	ONLY REWINDS WHEN POWERED UP	CHECK FOR OPEN SOLENOID (PS00029)
QUASAR	VH5290	N/A	BREAK LIFTER ARM WHEN UNLOADING	CHECK FOR BENT METAL TAPE FLAP OPENER (RIGHT FRONT
QUASAR	VH5290	N/A	RF INTERFERENCE IN PIX ON TUNER/PLAYBACK--VIDEO OUT SIG. OK	CHECK ALL SWITCHING DIODES IN RF MODULATOR CIRCUIT
QUASAR	VH5290	N/A	FAILURE OF SOLENOID	REPLACE SOLENOID AND MODE SELECT SW.-ADD A 1k TO THE END OF R6100 AWAY FROM IC W/1uF AT OTHER END TO GRD.
QUASAR	VH5290	N/A	WILL NOT REWIND AND EATS TAPES ON PLAYBACK	EXAMINE THE GEAR DIRECTLY BELOW MAIN DRIVE PULLEY. THIS IS ITEM# 141 ON THE BREAK DOWN.
QUASAR	VH5291	N/A	RF INTERFERENCE IN PIX ON TUNER/PLAYBACK--VIDEO OUT SIG. OK	CHECK ALL SWITCHING DIODES IN RF MODULATOR CIRCUIT
QUASAR	VH5291	N/A	ERRATIC OPERATION-LOADS TAPE IN VCR THEN NOTHING-MAY BEGIN TO PLAY TAPE AND JUST STOP BUT STAYS LOADED	CHECK/REPLACE MODE SWITCH ON RIGHT SIDE OF CASSETTE HOUSING AND HARD WIRE 4 WIRE PLUG CONNECTION.
QUASAR	VH5291	N/A	BREAK LIFTER ARM WHEN UNLOADING	CHECK FOR BENT METAL TAPE FLAP OPENER (RIGHT FRONT
QUASAR	VH5291	N/A	ONLY REWINDS WHEN POWERED UP	CHECK FOR OPEN SOLENOID (PS00029)
QUASAR	VH5291	N/A	BLOWS AC LINE FUSE IMMEDIATELY	CHECK F1001,D1001,C1004,Q1001,Q1002,D1015,D1005
QUASAR	VH5380	N/A	ONLY REWINDS WHEN POWERED UP	CHECK FOR OPEN SOLENOID (PS00029)
QUASAR	VH5380	N/A	WILL NOT REWIND AND EATS TAPES ON PLAYBACK	EXAMINE THE GEAR DIRECTLY BELOW MAIN DRIVE PULLEY. THIS IS ITEM# 141 ON THE BREAK DOWN.
QUASAR	VH5380	N/A	WILL NOT SWITCH FROM TV/VCR--12VOLT REGULATED SUPPLY IS LOW	CHECK/REPLACE Q1201 AND Q1202 FOR SHORT OR LEAKY
QUASAR	VH5380	N/A	INTERMITTENTLY GOES TO BLUE SCRN.--REW/FF SCAN PIX IS OK	CHECK FOR DEFECTIVE C2014 OR C2015 OR SOLDER CONNECTIONS ON EITHER.
QUASAR	VH5380	N/A	SCREEN GOES BLACK WHEN PROGRAM BUTTON ON REMOTE IS PUSHED TO SET CLOCK.	CHECK/REPLACE IC3003
QUASAR	VH5380	N/A	BLOWS AC LINE FUSE IMMEDIATELY	CHECK F1001,D1001,C1004,Q1001,Q1002,D1015,D1005
QUASAR	VH5380	N/A	BREAK LIFTER ARM WHEN UNLOADING	CHECK FOR BENT METAL TAPE FLAP OPENER (RIGHT FRONT
QUASAR	VH5380	N/A	DEW INDICATOR IS ON BUT VCR HAS NO DEW SENSOR	CHECK THE GROUND TO THE DEW INPUT (PIN 77) ON THE MICROPROCESSOR (IC6001)
QUASAR	VH5380	N/A	NO TUNER VIDEO IN VCR MODE - NO OSD - NO UNSWITCHED 5 VOLTS	CHECK/REPLACE L7001 FOR OPEN
QUASAR	VH5380	N/A	WILL NOT REWIND - MECHANICAL PROBLEM - MAY BE INTERMITTENT	CHECK/REPLACE SUB LEVER ASSEMBLY (VMMS0042)
QUASAR	VH5380	N/A	ERRATIC OPERATION-LOADS TAPE IN VCR THEN NOTHING-MAY BEGIN TO PLAY TAPE AND JUST STOP BUT STAYS LOADED	CHECK/REPLACE MODE SWITCH ON RIGHT SIDE OF CASSETTE HOUSING AND HARD WIRE 4 WIRE PLUG CONNECTION.
QUASAR	VH5388	N/A	WILL NOT REWIND AND EATS TAPES ON PLAYBACK	EXAMINE THE GEAR DIRECTLY BELOW MAIN DRIVE PULLEY. THIS IS ITEM# 141 ON THE BREAK DOWN.
QUASAR	VH5388	N/A	FAILURE OF SOLENOID	REPLACE SOLENOID AND MODE SELECT SW.-ADD A 1k TO THE END OF R6100 AWAY FROM IC W/1uF AT OTHER END TO GRD.
QUASAR	VH5388	N/A	ERRATIC OPERATION-LOADS TAPE IN VCR THEN NOTHING-MAY BEGIN TO PLAY TAPE AND JUST STOP BUT STAYS LOADED	CHECK/REPLACE MODE SWITCH ON RIGHT SIDE OF CASSETTE HOUSING AND HARD WIRE 4 WIRE PLUG CONNECTION.
QUASAR	VH5390	N/A	ONLY REWINDS WHEN POWERED UP	CHECK FOR OPEN SOLENOID (PS00029)
QUASAR	VH5390	N/A	ERRATIC OPERATION-LOADS TAPE IN VCR THEN NOTHING-MAY BEGIN TO PLAY TAPE AND JUST STOP BUT STAYS LOADED	CHECK/REPLACE MODE SWITCH ON RIGHT SIDE OF CASSETTE HOUSING AND HARD WIRE 4 WIRE PLUG CONNECTION.
QUASAR	VH5390	N/A	RF INTERFERENCE IN PIX ON TUNER/PLAYBACK--VIDEO OUT SIG. OK	CHECK ALL SWITCHING DIODES IN RF MODULATOR CIRCUIT
QUASAR	VH5390	N/A	BLOWS AC LINE FUSE IMMEDIATELY	CHECK F1001,D1001,C1004,Q1001,Q1002,D1015,D1005
QUASAR	VH5390	N/A	BREAK LIFTER ARM WHEN UNLOADING	CHECK FOR BENT METAL TAPE FLAP OPENER (RIGHT FRONT
QUASAR	VH5470	N/A	DEAD SET AND SHORT ON THE 5 VOLT LINE	CHECK/REPLACE C3137 AND PR1001
QUASAR	VH5470	N/A	DEAD WITH NO BLOWN FUSE OR REGULATOR TRANSISTOR	CHECK/REPLACE D1007 FOR SHORT (6.2V ZENER)
QUASAR	VH5470	N/A	NO AUDIO RECORDED AT ANY SPEED	CHECK IC4001
QUASAR	VH5470	N/A	GARBLED AUDIO IN LP AND SLP	CHECK PINCH ROLLER,CLUTCH ASSY.;IDLER
QUASAR	VH5470	N/A	NO COLOR	ADJUST VCO,VXO--CHECK 3.58MHZ,4.2MHZ,629KHZ
QUASAR	VH5470	N/A	NO DISPLAY AND NO FUSES BLOWN	CHECK/REPLACE C1015 AND C1016 (330uF @ 16v)
QUASAR	VH5470	N/A	AFTER UNIT RUNS FOR 1/2 TO 1 HOUR, DISPLAY GOES OUT AND VCR LOCKS UP - WON'T TAKE ANY COMMANDS	CHECK/REPLACE IC7502 (MN1280-R) RESET IC
QUASAR	VH5470	N/A	TV/VCR FUNCTIONS DOESN'T WORK BUT INDICATOR DOES LIGHT IN THE FIP DISPLAY	CHECK/REPLACE IC7601
QUASAR	VH5470	N/A	FLOURESCENT DISPLAY VERY ERRATIC OR OUT COMPLETELY	CHECK/REPLACE C1004
QUASAR	VH5470	N/A	DEAD WITH NO BLOWN FUSE OR REGULATOR TRANSISTOR	CHECK/REPLACE D1007 FOR SHORT (6.2V ZENER)
QUASAR	VH5470	N/A	NO TUNER VIDEO BUT PLAYS A TAPE OK	CHECK/REPLACE L708,R721 AND C723
QUASAR	VH5470	N/A	PIX JITTERS ON SPECIAL EFFECTS	CHECK V-LOCK ADJUSTMENT-WORN HEADS-PG SHIFTERS TR.FIX
QUASAR	VH5470	N/A	ONE TICK FROM POWER SUPPLY-NO DISPLAY-NO POWER	CHECK PR1001,L1003,D1011,C1015 AND C1016
QUASAR	VH5470	N/A	WON'T RECORD -- MANUAL OR OTR	CLEAN OR REPLACE ERASE PROTECT SWITCH
QUASAR	VH5470	N/A	TRACKING PROBLEMS IN SP MODE AND 'DONALD DUCK' IN LP AND SLP MODES	CHECK/REPLACE C2023 FOR SHORT
QUASAR	VH5470	N/A	PICTURE WOULD GO FROM GOOD TO SNOW-GOOD TO SNOW	CHECK/REPLACE C2023
QUASAR	VH5470	N/A	GARBLED AUDIO-TUNER AUDIO NOT SWITCHING ON P.B.	REPLACE IC4001
QUASAR	VH5470	N/A	TRACKING ADJUSTMENTS	MOST ACCURATELY PERFORMED IN SP MODE.
QUASAR	VH5470	N/A	DD CYLINDER RUNS FOR ABOUT 1 MINUTE - CHANNEL NUMBERS CHANGE BUT RECEIVES ONLY SNOW	CHECK/REPLACE D1008 AND R1010
QUASAR	VH5470	N/A	POWER SUPPLY IS TICKING	CHECK D1007 FOR SHORT OR LEAKAGE
QUASAR	VH5470	N/A	WOW & FLUTTER MOSTLY IN SLP SPEED	CHECK/REPLACE PINCH ROLLER
QUASAR	VH5470	N/A	CAPSTAN SPINS THEN POWER SHUTS OFF (AT POWER UP)	CHECK IC6001 AND IC6002
QUASAR	VH5470	N/A	WHEN UNIT IS PLUGGED IN,CAPSTAN RUNS 4-5 SECONDS AND SHUTS DOWN.	CHECK/REPLACE D1008 AND R1010
QUASAR	VH5470	N/A	SUPPLY REELS START TURNING AS SOON AS UNIT IS PLUGGED IN BUT WILL NOT STAY ON - WILL NOT LOAD CASSETTE	CHECK/REPLACE R1010,D1008 AND C1011
QUASAR	VH5470	N/A	DRUM MOTOR WILL NOT RUN	CHECK/REPLACE IC2603
QUASAR	VH5477	N/A	DEAD	CHECK/REPLACE C1015,C1016,C1018 AND C1019 IN POWER SUPPLY
QUASAR	VH5480	N/A	ERRATIC OPERATION-LOADS TAPE IN VCR THEN NOTHING-MAY BEGIN TO PLAY TAPE AND JUST STOP BUT STAYS LOADED	CHECK/REPLACE MODE SWITCH ON RIGHT SIDE OF CASSETTE HOUSING AND HARD WIRE 4 WIRE PLUG CONNECTION.
QUASAR	VH5480	N/A	WILL NOT REWIND AND EATS TAPES ON PLAYBACK	EXAMINE THE GEAR DIRECTLY BELOW MAIN DRIVE PULLEY. THIS IS ITEM# 141 ON THE BREAK DOWN.
QUASAR	VH5480	N/A	FAILURE OF SOLENOID	REPLACE SOLENOID AND MODE SELECT SW.-ADD A 1k TO THE END OF R6100 AWAY FROM IC W/1uF AT OTHER END TO GRD.
QUASAR	VH5485	N/A	ERRATIC OPERATION-LOADS TAPE IN VCR THEN NOTHING-MAY BEGIN TO PLAY TAPE AND JUST STOP BUT STAYS LOADED	CHECK/REPLACE MODE SWITCH ON RIGHT SIDE OF CASSETTE HOUSING AND HARD WIRE 4 WIRE PLUG CONNECTION.
QUASAR	VH5485	N/A	FAILURE OF SOLENOID	REPLACE SOLENOID AND MODE SELECT SW.-ADD A 1k TO THE END OF R6100 AWAY FROM IC W/1uF AT OTHER END TO GRD.
QUASAR	VH5485	N/A	WILL NOT REWIND AND EATS TAPES ON PLAYBACK	EXAMINE THE GEAR DIRECTLY BELOW MAIN DRIVE PULLEY. THIS IS ITEM# 141 ON THE BREAK DOWN.
QUASAR	VH5490	N/A	BREAK LIFTER ARM WHEN UNLOADING	CHECK FOR BENT METAL TAPE FLAP OPENER (RIGHT FRONT
QUASAR	VH5490	N/A	ERRATIC OPERATION-LOADS TAPE IN VCR THEN NOTHING-MAY BEGIN TO PLAY TAPE AND JUST STOP BUT STAYS LOADED	CHECK/REPLACE MODE SWITCH ON RIGHT SIDE OF CASSETTE HOUSING AND HARD WIRE 4 WIRE PLUG CONNECTION.
QUASAR	VH5490	N/A	BLOWS AC LINE FUSE IMMEDIATELY	CHECK F1001,D1001,C1004,Q1001,Q1002,D1015,D1005
QUASAR	VH5490	N/A	RF INTERFERENCE IN PIX ON TUNER/PLAYBACK--VIDEO OUT SIG. OK	CHECK ALL SWITCHING DIODES IN RF MODULATOR CIRCUIT
QUASAR	VH5490	N/A	ONLY REWINDS WHEN POWERED UP	CHECK FOR OPEN SOLENOID (PS00029)
QUASAR	VH5495	N/A	RF INTERFERENCE IN PIX ON TUNER/PLAYBACK--VIDEO OUT SIG. OK	CHECK ALL SWITCHING DIODES IN RF MODULATOR CIRCUIT
QUASAR	VH5495	N/A	ERRATIC OPERATION-LOADS TAPE IN VCR THEN NOTHING-MAY BEGIN TO PLAY TAPE AND JUST STOP BUT STAYS LOADED	CHECK/REPLACE MODE SWITCH ON RIGHT SIDE OF CASSETTE HOUSING AND HARD WIRE 4 WIRE PLUG CONNECTION.
QUASAR	VH5495	N/A	BLOWS AC LINE FUSE IMMEDIATELY	CHECK F1001,D1001,C1004,Q1001,Q1002,D1015,D1005
QUASAR	VH5495	N/A	BREAK LIFTER ARM WHEN UNLOADING	CHECK FOR BENT METAL TAPE FLAP OPENER (RIGHT FRONT
QUASAR	VH5495	N/A	ONLY REWINDS WHEN POWERED UP	CHECK FOR OPEN SOLENOID (PS00029)
QUASAR	VH5590	N/A	BLOWS AC LINE FUSE IMMEDIATELY	CHECK F1001,D1001,C1004,Q1001,Q1002,D1015,D1005
QUASAR	VH5590	N/A	RF INTERFERENCE IN PIX ON TUNER/PLAYBACK--VIDEO OUT SIG. OK	CHECK ALL SWITCHING DIODES IN RF MODULATOR CIRCUIT
QUASAR	VH5590	N/A	BREAK LIFTER ARM WHEN UNLOADING	CHECK FOR BENT METAL TAPE FLAP OPENER (RIGHT FRONT
QUASAR	VH5590	N/A	ONLY REWINDS WHEN POWERED UP	CHECK FOR OPEN SOLENOID (PS00029)
QUASAR	VH5590	N/A	ERRATIC OPERATION-LOADS TAPE IN VCR THEN NOTHING-MAY BEGIN TO PLAY TAPE AND JUST STOP BUT STAYS LOADED	CHECK/REPLACE MODE SWITCH ON RIGHT SIDE OF CASSETTE HOUSING AND HARD WIRE 4 WIRE PLUG CONNECTION.
QUASAR	VH5595	N/A	BLOWS AC LINE FUSE IMMEDIATELY	CHECK F1001,D1001,C1004,Q1001,Q1002,D1015,D1005
QUASAR	VH5595	N/A	BREAK LIFTER ARM WHEN UNLOADING	CHECK FOR BENT METAL TAPE FLAP OPENER (RIGHT FRONT
QUASAR	VH5595	N/A	ERRATIC OPERATION-LOADS TAPE IN VCR THEN NOTHING-MAY BEGIN TO PLAY TAPE AND JUST STOP BUT STAYS LOADED	CHECK/REPLACE MODE SWITCH ON RIGHT SIDE OF CASSETTE HOUSING AND HARD WIRE 4 WIRE PLUG CONNECTION.
QUASAR	VH5595	N/A	RF INTERFERENCE IN PIX ON TUNER/PLAYBACK--VIDEO OUT SIG. OK	CHECK ALL SWITCHING DIODES IN RF MODULATOR CIRCUIT
QUASAR	VH5595	N/A	ONLY REWINDS WHEN POWERED UP	CHECK FOR OPEN SOLENOID (PS00029)
QUASAR	VH5985	N/A	ERRATIC OPERATION-LOADS TAPE IN VCR THEN NOTHING-MAY BEGIN TO PLAY TAPE AND JUST STOP BUT STAYS LOADED	CHECK/REPLACE MODE SWITCH ON RIGHT SIDE OF CASSETTE HOUSING AND HARD WIRE 4 WIRE PLUG CONNECTION.
QUASAR	VH5985	N/A	BLOWS AC LINE FUSE IMMEDIATELY	CHECK F1001,D1001,C1004,Q1001,Q1002,D1015,D1005
QUASAR	VH5985	N/A	RF INTERFERENCE IN PIX ON TUNER/PLAYBACK--VIDEO OUT SIG. OK	CHECK ALL SWITCHING DIODES IN RF MODULATOR CIRCUIT
QUASAR	VH5985	N/A	ONLY REWINDS WHEN POWERED UP	CHECK FOR OPEN SOLENOID (PS00029)
QUASAR	VH5985	N/A	BREAK LIFTER ARM WHEN UNLOADING	CHECK FOR BENT METAL TAPE FLAP OPENER (RIGHT FRONT
QUASAR	VH6200	N/A	BREAK LIFTER ARM WHEN UNLOADING	CHECK FOR BENT METAL TAPE FLAP OPENER (RIGHT FRONT
QUASAR	VH6200	N/A	BLOWS AC LINE FUSE IMMEDIATELY	CHECK F1001,D1001,C1004,Q1001,Q1002,D1015,D1005
QUASAR	VH6200	N/A	RF INTERFERENCE IN PIX ON TUNER/PLAYBACK--VIDEO OUT SIG. OK	CHECK ALL SWITCHING DIODES IN RF MODULATOR CIRCUIT
QUASAR	VH6200	N/A	ONLY REWINDS WHEN POWERED UP	CHECK FOR OPEN SOLENOID (PS00029)
QUASAR	VH6200	N/A	ERRATIC OPERATION-LOADS TAPE IN VCR THEN NOTHING-MAY BEGIN TO PLAY TAPE AND JUST STOP BUT STAYS LOADED	CHECK/REPLACE MODE SWITCH ON RIGHT SIDE OF CASSETTE HOUSING AND HARD WIRE 4 WIRE PLUG CONNECTION.
QUASAR	VH6201	N/A	BLOWS AC LINE FUSE IMMEDIATELY	CHECK F1001,D1001,C1004,Q1001,Q1002,D1015,D1005
QUASAR	VH6201	N/A	ONLY REWINDS WHEN POWERED UP	CHECK FOR OPEN SOLENOID (PS00029)
QUASAR	VH6201	N/A	ERRATIC OPERATION-LOADS TAPE IN VCR THEN NOTHING-MAY BEGIN TO PLAY TAPE AND JUST STOP BUT STAYS LOADED	CHECK/REPLACE MODE SWITCH ON RIGHT SIDE OF CASSETTE HOUSING AND HARD WIRE 4 WIRE PLUG CONNECTION.
QUASAR	VH6201	N/A	RF INTERFERENCE IN PIX ON TUNER/PLAYBACK--VIDEO OUT SIG. OK	CHECK ALL SWITCHING DIODES IN RF MODULATOR CIRCUIT
QUASAR	VH6201	N/A	BREAK LIFTER ARM WHEN UNLOADING	CHECK FOR BENT METAL TAPE FLAP OPENER (RIGHT FRONT
QUASAR	VH6203	N/A	RF INTERFERENCE IN PIX ON TUNER/PLAYBACK--VIDEO OUT SIG. OK	CHECK ALL SWITCHING DIODES IN RF MODULATOR CIRCUIT
QUASAR	VH6203	N/A	ERRATIC OPERATION-LOADS TAPE IN VCR THEN NOTHING-MAY BEGIN TO PLAY TAPE AND JUST STOP BUT STAYS LOADED	CHECK/REPLACE MODE SWITCH ON RIGHT SIDE OF CASSETTE HOUSING AND HARD WIRE 4 WIRE PLUG CONNECTION.
QUASAR	VH6400	N/A	ERRATIC OPERATION-LOADS TAPE IN VCR THEN NOTHING-MAY BEGIN TO PLAY TAPE AND JUST STOP BUT STAYS LOADED	CHECK/REPLACE MODE SWITCH ON RIGHT SIDE OF CASSETTE HOUSING AND HARD WIRE 4 WIRE PLUG CONNECTION.
QUASAR	VH6400	N/A	ONLY REWINDS WHEN POWERED UP	CHECK FOR OPEN SOLENOID (PS00029)
QUASAR	VH6400	N/A	BREAK LIFTER ARM WHEN UNLOADING	CHECK FOR BENT METAL TAPE FLAP OPENER (RIGHT FRONT
QUASAR	VH6400	N/A	BLOWS AC LINE FUSE IMMEDIATELY	CHECK F1001,D1001,C1004,Q1001,Q1002,D1015,D1005
QUASAR	VH6400	N/A	RF INTERFERENCE IN PIX ON TUNER/PLAYBACK--VIDEO OUT SIG. OK	CHECK ALL SWITCHING DIODES IN RF MODULATOR CIRCUIT
QUASAR	VH6401	N/A	BLOWS AC LINE FUSE IMMEDIATELY	CHECK F1001,D1001,C1004,Q1001,Q1002,D1015,D1005
QUASAR	VH6401	N/A	ERRATIC OPERATION-LOADS TAPE IN VCR THEN NOTHING-MAY BEGIN TO PLAY TAPE AND JUST STOP BUT STAYS LOADED	CHECK/REPLACE MODE SWITCH ON RIGHT SIDE OF CASSETTE HOUSING AND HARD WIRE 4 WIRE PLUG CONNECTION.
QUASAR	VH6401	N/A	ONLY REWINDS WHEN POWERED UP	CHECK FOR OPEN SOLENOID (PS00029)
QUASAR	VH6401	N/A	RF INTERFERENCE IN PIX ON TUNER/PLAYBACK--VIDEO OUT SIG. OK	CHECK ALL SWITCHING DIODES IN RF MODULATOR CIRCUIT
QUASAR	VH6401	N/A	BREAK LIFTER ARM WHEN UNLOADING	CHECK FOR BENT METAL TAPE FLAP OPENER (RIGHT FRONT
QUASAR	VH6403	N/A	ONLY REWINDS WHEN POWERED UP	CHECK FOR OPEN SOLENOID (PS00029)
QUASAR	VH6403	N/A	BREAK LIFTER ARM WHEN UNLOADING	CHECK FOR BENT METAL TAPE FLAP OPENER (RIGHT FRONT
QUASAR	VH6403	N/A	BLOWS AC LINE FUSE IMMEDIATELY	CHECK F1001,D1001,C1004,Q1001,Q1002,D1015,D1005
QUASAR	VH6403	N/A	ERRATIC OPERATION-LOADS TAPE IN VCR THEN NOTHING-MAY BEGIN TO PLAY TAPE AND JUST STOP BUT STAYS LOADED	CHECK/REPLACE MODE SWITCH ON RIGHT SIDE OF CASSETTE HOUSING AND HARD WIRE 4 WIRE PLUG CONNECTION.
QUASAR	VH6408	N/A	AUDIO BUZZ HEARD WITH PREMIUM CHANNELS ON CABLE TV	CUT FOIL BETWEEN IC701 PIN 5 AND C721.PUT JUMPER FROM IC701 PIN 7 OPEN SIDE OF C721.ADD 220pF FROM TP4 TO GROUND.
QUASAR	VH6505	N/A	AUDIO BUZZ HEARD WITH PREMIUM CHANNELS ON CABLE TV	CUT FOIL BETWEEN IC701 PIN 5 AND C721.PUT JUMPER FROM IC701 PIN 7 OPEN SIDE OF C721.ADD 220pF FROM TP4 TO GROUND.
QUASAR	VP5748XE	N/A	WILL NOT RESPOND WHEN CONNECTED TO TUNER-BAT.OK	CHECK D7527
QUASAR	VP5748XE	N/A	LCD DIMS AFTER A FEW SECONDS	REPLACE IC1001 (UN101) ON FRONT PANEL
QUASAR	VP5748XE	N/A	WHEN PLUGGING UNIT IN DD CYLINDER SPINS	CHECK/REPLACE IC6401
RANDIX	RHV5500	N/A	LOW REEL TORQUE ONLY ON PLAY AND RECORD	TIE A 10K ACROSS R623 TO IMPROVE TORQUE
RANDIX	RHV5500	N/A	COUNTER WILL NOT COUNT	MODIFY PER SERVICE BULLETIN FOR GHV-1240M (MANUAL)
RANDIX	RHV5500	N/A	DEW INDICATOR STAYS ON AND DRUM RUNS CONSTANTLY	CHECK/REPLACE DEW SENSOR OR IC606 - SHORT DEW SENSOR LEADS
RANDIX	RHV5500	N/A	NO CAPSTAN SERVO LOCK	CHECK/REPLACE IC501 OR CAPACITOR AROUND IC501
RANDIX	RHV6600	N/A	WILL NOT ACCEPT TAPE	CHECK IC602
RANDIX	RHV6600	N/A	1 KHz TONE IN AUDIO ON PLAYBACK	CHECK/REPLACE R401 OR OPEN GROUND TO THE GROUND SIDE OF
RANDIX	RHV6600	N/A	NO SPEED CONTROL - RUNAWAY ON PLAY	CHECK/REPLACE C247 AND C248
RCA	PSVR61	N/A	INTERMITTENT RECORDING OF LINEAR AUDIO - OLD AUDIO NOT BEING ERASED	CHANGE C722 TO 0.01uF (P/N# 174423), SHORT EITHER R724 OR R725, CHANGE R722 TO A 18k (P/N# 174366)
RCA	PSVR61	N/A	WILL NOT POWER OFF AFTER A XPR RECORDING SESSION - GOES TO STOP AND REMAINS POWERED ON	CHECK/REPLACE IC01 WITH NEW TYPE (P/N# 211942)
RCA	PSVR61	N/A	MECHANISM JAMS WHEN LOADING TAPE AROUND CYLINDER	CHECK/REPLACE LEVER K128 (P/N# 212321) WITH NEW TYPE - ALSO CHECK CAM GEAR FOR DAMAGED TEETH
RCA	PSVR61	N/A	FULL OSD IS NOT DISPLAYED WHEN CASSETTE TAPE IS IN VCR	CHECK/REPLACE IC01 WITH NEW TYPE (P/N# 211942)
RCA	PSVR62	N/A	FLUORESCENT DISPLAY FLASHES INTERMITTENTLY ONLY WHEN THE UNIT IS IN THE OFF MODE - MAY GO FROM TIME DISPLAY TO --:--	CHECK/REPLACE IC501 (P/N# 229329)
RCA	PSVR62	N/A	FLUORESCENT DISPLAY FLASHES INTERMITTENTLY ONLY WHEN THE UNIT IS IN THE OFF MODE - MAY GO FROM TIME DISPLAY TO --:--	ADD INTERRUPT CBA (P/N# 233213)
RCA	PSVR62	N/A	NO COLOR IN LP SEARCH	THIS IS NOT A MALFUNCTION BUT A DESIGN CHARACTERISTIC
RCA	PSVR62	N/A	FRONT PANEL TRACKING BUTTONS INOPERATIVE	THESE BUTTONS CANNOT BE HELD DOWN - THEY HAVE TO BE PRESSED AND RELEASED REPEATEDLY
RCA	PSVR81	N/A	WILL NOT POWER OFF AFTER A XPR RECORDING SESSION - GOES TO STOP AND REMAINS POWERED ON	CHECK/REPLACE IC01 WITH NEW TYPE (P/N# 211942)
RCA	PSVR81	N/A	FULL OSD IS NOT DISPLAYED WHEN CASSETTE TAPE IS IN VCR	CHECK/REPLACE IC01 WITH NEW TYPE (P/N# 211942)
RCA	PSVR81	N/A	MECHANISM JAMS WHEN LOADING TAPE AROUND CYLINDER	CHECK/REPLACE LEVER K128 (P/N# 212321) WITH NEW TYPE - ALSO CHECK CAM GEAR FOR DAMAGED TEETH
RCA	PSVR81	N/A	INTERMITTENT RECORDING OF LINEAR AUDIO - OLD AUDIO NOT BEING ERASED	CHANGE C722 TO 0.01uF (P/N# 174423), SHORT EITHER R724 OR R725, CHANGE R722 TO A 18k (P/N# 174366)
RCA	PSVR82	N/A	FRONT PANEL TRACKING BUTTONS INOPERATIVE	THESE BUTTONS CANNOT BE HELD DOWN - THEY HAVE TO BE PRESSED AND RELEASED REPEATEDLY
RCA	PSVR82	N/A	NO COLOR IN LP SEARCH	THIS IS NOT A MALFUNCTION BUT A DESIGN CHARACTERISTIC
RCA	PSVR82	N/A	FLUORESCENT DISPLAY FLASHES INTERMITTENTLY ONLY WHEN THE UNIT IS IN THE OFF MODE - MAY GO FROM TIME DISPLAY TO --:--	ADD INTERRUPT CBA (P/N# 233213)
RCA	PSVR82	N/A	FLUORESCENT DISPLAY FLASHES INTERMITTENTLY ONLY WHEN THE UNIT IS IN THE OFF MODE - MAY GO FROM TIME DISPLAY TO --:--	CHECK/REPLACE IC501 (P/N# 229329)
RCA	VBT200	N/A	INT. SOUND -- BUZZ IN AUDIO -- LOW LEVEL AUDIO	S401 NEEDS CLEANED -- DIRTY CONTACTS
RCA	VBT200	N/A	INT. TRACKING PROBLEM	POSSIBLE DIRTY S201 (SLIDE SWITCH)
RCA	VET650	N/A	NO VIDEO IN E-E BUT AUDIO OK--RECORD AND PLAYBACK OK	CHECK C3127 FOR LEAKAGE
RCA	VFP170	N/A	VIDEO/AUDIO DISTORTED (LOOKS LIKE AC IN PICTURE)	CHECK C953
RCA	VFP170	N/A	TAPE PLAYS FINE--TUNER AUDIO/VIDEO IS DISTORTED	C953 (47uF) IN POWER SUPPLY OPEN.
RCA	VGP170	N/A	SNOWY PIX-INTERMITTENT-LOOKS LIKE A BAD HEAD	CHECK OR CLEAN RELAY ON HEAD AMP. BOARD
RCA	VKP900	N/A	DISTORTED OSD - LOOKS LIKE PAC-MAN ON THE SCREEN	CHECK/REPLACE IC102 (160879)
RCA	VKP900	N/A	DEW SENSOR INDICATOR ON EVEN THOUGH MACHINE IS DRY	ADD C826 .047uF (149297) BETWEEN PINS 8 AND 9 OF IC806
RCA	VKP900	N/A	GOES TO POWER OFF MODE WHEN TRYING TO REVERSE SEARCH	ADD (2) DIODES (153493) IN SERIES WITH ANODE ON PIN 9 AND CATHODE ON PIN 1 OF IC901
RCA	VKP900T	N/A	ERRATIC CAPSTAN SPEED - SWITCHES FROM SP TO SLP	INSULATE GROMMETS ON BOTTOM COVER THAT HAVE DISCOLORED AND BECOME CONDUCTIVE-ALSO CHECK C526,C551,R550
RCA	VKP925	N/A	DEW SENSOR INDICATOR ON EVEN THOUGH MACHINE IS DRY	ADD C826 .047uF (149297) BETWEEN PINS 8 AND 9 OF IC806
RCA	VKP925	N/A	DISTORTED OSD - LOOKS LIKE PAC-MAN ON THE SCREEN	CHECK/REPLACE IC102 (160879)
RCA	VKP925	N/A	GOES TO POWER OFF MODE WHEN TRYING TO REVERSE SEARCH	ADD (2) DIODES (153493) IN SERIES WITH ANODE ON PIN 9 AND CATHODE ON PIN 1 OF IC901
RCA	VKP925T	N/A	ERRATIC CAPSTAN SPEED - SWITCHES FROM SP TO SLP	INSULATE GROMMETS ON BOTTOM COVER THAT HAVE DISCOLORED AND BECOME CONDUCTIVE-ALSO CHECK C526,C551,R550
RCA	VKP926	N/A	GOES TO POWER OFF MODE WHEN TRYING TO REVERSE SEARCH	ADD (2) DIODES (153493) IN SERIES WITH ANODE ON PIN 9 AND CATHODE ON PIN 1 OF IC901
RCA	VKP926	N/A	ERRATIC CAPSTAN SPEED - SWITCHES FROM SP TO SLP	INSULATE GROMMETS ON BOTTOM COVER THAT HAVE DISCOLORED AND BECOME CONDUCTIVE-ALSO CHECK C526,C551,R550
RCA	VKP926	N/A	DISTORTED OSD - LOOKS LIKE PAC-MAN ON THE SCREEN	CHECK/REPLACE IC102 (160879)
RCA	VKP926	N/A	DEW SENSOR INDICATOR ON EVEN THOUGH MACHINE IS DRY	ADD C826 .047uF (149297) BETWEEN PINS 8 AND 9 OF IC806
RCA	VKP926T	N/A	NO AUDIO/NO VIDEO/NO TUNER OPERATION/ETC.	CHECK 4PDT SWITCH INSIDE CAMERA PLUG(TUNER/CAMERA SW)
RCA	VKP927	N/A	ERRATIC CAPSTAN SPEED - SWITCHES FROM SP TO SLP	INSULATE GROMMETS ON BOTTOM COVER THAT HAVE DISCOLORED AND BECOME CONDUCTIVE-ALSO CHECK C526,C551,R550
RCA	VKP950	N/A	WASHED OUT PIX AFTER 2-5 SECONDS-TOO MUCH WHITE	DECREASE THE VALUE OF R457 TO 56 OHM
RCA	VKP950	N/A	DISTORTED OSD - LOOKS LIKE PAC-MAN ON THE SCREEN	CHECK/REPLACE IC102 (160879)
RCA	VKT275	N/A	VERT SYNC COMPRESSED OR DISTORTED-VERTICAL ROLL USUALLY ON LP AND SLP	CHANGE R619 >8.2k AND R620 >4.7k - ADD .047uF ACROSS R271
RCA	VKT275	N/A	RFI INTERFERENCE WHEN CONNECTED TO AC LINE	ADD 4.7uH(150702) IN SERIES FROM IC702 PIN 2 TO THE CATHODE OF D749-GROUND THE SHEILD OF THE DC-DC CONVERTOR
RCA	VKT300	N/A	VERT SYNC COMPRESSED OR DISTORTED-VERTICAL ROLL USUALLY ON LP AND SLP	CHANGE R619 >8.2k AND R620 >4.7k - ADD .047uF ACROSS R271
RCA	VKT300	N/A	NO CAPSTAN MOTOR OPERATION	CHECK/REPLACE R631 FOR OPEN
RCA	VKT300	N/A	RFI INTERFERENCE WHEN CONNECTED TO AC LINE	ADD 4.7uH(150702) IN SERIES FROM IC702 PIN 2 TO THE CATHODE OF D749-GROUND THE SHEILD OF THE DC-DC CONVERTOR
RCA	VKT300	N/A	RFI INTERFERENCE WHEN CONNECTED TO AC LINE	ADD 4.7uH(150702) IN SERIES FROM IC702 PIN 2 TO THE CATHODE OF D749-GROUND THE SHEILD OF THE DC-DC CONVERTOR
RCA	VKT310	N/A	VERT SYNC COMPRESSED OR DISTORTED-VERTICAL ROLL USUALLY ON LP AND SLP	CHANGE R619 >8.2k AND R620 >4.7k - ADD .047uF ACROSS R271
RCA	VKT310	N/A	RFI INTERFERENCE WHEN CONNECTED TO AC LINE	ADD 4.7uH(150702) IN SERIES FROM IC702 PIN 2 TO THE CATHODE OF D749-GROUND THE SHEILD OF THE DC-DC CONVERTOR
RCA	VKT325	N/A	VERT SYNC COMPRESSED OR DISTORTED-VERTICAL ROLL USUALLY ON LP AND SLP	CHANGE R619 >8.2k AND R620 >4.7k - ADD .047uF ACROSS R271
RCA	VKT325	N/A	RFI INTERFERENCE WHEN CONNECTED TO AC LINE	ADD 4.7uH(150702) IN SERIES FROM IC702 PIN 2 TO THE CATHODE OF D749-GROUND THE SHEILD OF THE DC-DC CONVERTOR
RCA	VKT326	N/A	VERT SYNC COMPRESSED OR DISTORTED-VERTICAL ROLL USUALLY ON LP AND SLP	CHANGE R619 >8.2k AND R620 >4.7k - ADD .047uF ACROSS R271
RCA	VKT326	N/A	RFI INTERFERENCE WHEN CONNECTED TO AC LINE	ADD 4.7uH(150702) IN SERIES FROM IC702 PIN 2 TO THE CATHODE OF D749-GROUND THE SHEILD OF THE DC-DC CONVERTOR
RCA	VKT375	N/A	UNIT THINKS THAT A TAPE IS INSERTED	REPLACE BOTH TAPE END SENSORS
RCA	VKT375	N/A	CAPSTAN MOTOR WILL NOT RUN	CHECK/REPLACE R631 FOR OPEN - ALSO INSPECT THE CAPSTAN FLYWHEEL BEARINGS FOR LUBRICATION
RCA	VKT375	N/A	NO DISPLAY-ALL OTHER FUNCTIONS ARE OK	CHECK C805,C807 AND DC-DC CONVERTER,IP801
RCA	VKT375	N/A	RFI INTERFERENCE WHEN CONNECTED TO AC LINE	ADD A 4.7uH COIL(150702) IN SERIES FROM DD801 PIN 2 TO THE ANODE OF D801-GROUND SHEILD OF DC-DC CONVERTOR
RCA	VKT375	N/A	POWER SUPPLY BLOWS FUSES IMMEDIATELY-DIODES OK	CHECK C854 AND C860 SHORTED
RCA	VKT375	N/A	DRUM MOTOR WON'T START INTERMITTENTLY	CHECK FOR COLD SOLDER CONNECTIONS ON D617 AND D618
RCA	VKT375	N/A	CAPSTAN SPEED IS OFF - TOO SLOW ON SP AND TOO FAST ON SLP	CHECK/REPLACE IC604 -CHECK PWM OUTPUT ON PIN#10 AND PIN#15 OF IC604 FOR PWM OUTPUT.
RCA	VKT385	N/A	UNIT THINKS THAT A TAPE IS INSERTED	REPLACE BOTH TAPE END SENSORS
RCA	VKT385	N/A	NO DISPLAY	DC-DC CONVERTER BAD-REPL. (2) OPEN 47uF CAPACITORS
RCA	VKT385	N/A	RFI INTERFERENCE WHEN CONNECTED TO AC LINE	ADD A 4.7uH COIL(150702) IN SERIES FROM DD801 PIN 2 TO THE ANODE OF D801-GROUND SHEILD OF DC-DC CONVERTOR
RCA	VKT385	N/A	CAPSTAN MOTOR WILL NOT RUN	CHECK/REPLACE R631 FOR OPEN - ALSO INSPECT THE CAPSTAN FLYWHEEL BEARINGS FOR LUBRICATION
RCA	VKT385	N/A	DRUM MOTOR WON'T START INTERMITTENTLY	CHECK FOR COLD SOLDER CONNECTIONS ON D617 AND D618
RCA	VKT385	N/A	CAPSTAN SPEED IS OFF - TOO SLOW ON SP AND TOO FAST ON SLP	CHECK/REPLACE IC604 -CHECK PWM OUTPUT ON PIN#10 AND PIN#15 OF IC604 FOR PWM OUTPUT.
RCA	VKT385	N/A	INTERFERRENCE IN VIDEO-ESPECIALLY HIGH CHANNELS	APPEARS TO BE RADIATION--REPL.(2) 47uF @ 50 (DC-DC)
RCA	VKT385	N/A	POWER SUPPLY BLOWS FUSES IMMEDIATELY-DIODES OK	CHECK C854 AND C860 SHORTED
RCA	VKT400	N/A	INTERMITTENT CHANNEL CHANGE	ADJUST RT1216 FOR 835KHz AT PIN 33 OF IC1201
RCA	VKT425	N/A	INTERMITTENT CHANNEL CHANGE	ADJUST RT1216 FOR 835KHz AT PIN 33 OF IC1201
RCA	VKT426	N/A	INTERMITTENT CHANNEL CHANGE	ADJUST RT1216 FOR 835KHz AT PIN 33 OF IC1201
RCA	VKT550	N/A	NO TIMER DISPLAY	CHECK C1201 FOR SHORT AND R1201 FOR OPEN
RCA	VKT555	N/A	NO DISPLAY - MISSING FILAMENT VOLTAGE	CHECK C1701 FOR OPEN--MAY BE MARKED C1201 ON SCHEMATC
RCA	VKT650	N/A	NO CLOCK DISPLAY	CHECK/REPLACE Q1706 FOR SHORT
RCA	VKT650	N/A	PLAYBACK IS AT WRONG SPEED	CHANGE R639 >820 ohms - R639 SHOULD BE RECONNECTED TO THE SWITCHED 5v INSTEAD OF ALLTIME 5v.
RCA	VKT700	N/A	POOR PICTURE QUALITY	CHANGE R251>1.5k,C251>390pF(152606),C269>100pF(143871), C271>220pF(149233),L216>(150378)
RCA	VKT700	N/A	AUDIO BUZZ ON HI-FI PLAYBACK	CHANGE RT2001>100k,RT2002>220k,R2019>10k,R2022>39k, R2024>180k
RCA	VLP800	N/A	NO FUNCTIONS WORK-POWERS UP AND FUNCTION LED'S LIGHT WHEN A BUTTON IS PRESSED BUT NOTHING ELSE HAPPENS.	CHECK/REPLACE Q704 AND Q710 FOR SHORT OR LEAKY.
RCA	VLP800	N/A	NO TV/VCR LED - NO CHARGING OF BATTERY BUT VCR PORTION WORKS FINE	CHECK/REPLACE L701,L702,C719,C723,C713 AND Q710
RCA	VLP800	N/A	ERRATIC CAPSTAN SPEED - SWITCHES FROM SP TO SLP	INSULATE GROMMETS ON BOTTOM COVER THAT HAVE DISCOLORED AND BECOME CONDUCTIVE-ALSO CHECK C526,C551,R550
RCA	VLP825	N/A	NO FUNCTIONS WORK-POWERS UP AND FUNCTION LED'S LIGHT WHEN A BUTTON IS PRESSED BUT NOTHING ELSE HAPPENS.	CHECK/REPLACE Q704 AND Q710 FOR SHORT OR LEAKY.
RCA	VLP825	N/A	NO TV/VCR LED - NO CHARGING OF BATTERY BUT VCR PORTION WORKS FINE	CHECK/REPLACE L701,L702,C719,C723,C713 AND Q710
RCA	VLP825	N/A	ERRATIC CAPSTAN SPEED - SWITCHES FROM SP TO SLP	INSULATE GROMMETS ON BOTTOM COVER THAT HAVE DISCOLORED AND BECOME CONDUCTIVE-ALSO CHECK C526,C551,R550
RCA	VLP826	N/A	NO FUNCTIONS WORK-POWERS UP AND FUNCTION LED'S LIGHT WHEN A BUTTON IS PRESSED BUT NOTHING ELSE HAPPENS.	CHECK/REPLACE Q704 AND Q710 FOR SHORT OR LEAKY.
RCA	VLP826	N/A	NO TV/VCR LED - NO CHARGING OF BATTERY BUT VCR PORTION WORKS FINE	CHECK/REPLACE L701,L702,C719,C723,C713 AND Q710
RCA	VLP827	N/A	NO TV/VCR LED - NO CHARGING OF BATTERY BUT VCR PORTION WORKS FINE	CHECK/REPLACE L701,L702,C719,C723,C713 AND Q710
RCA	VLP827	N/A	NO FUNCTIONS WORK-POWERS UP AND FUNCTION LED'S LIGHT WHEN A BUTTON IS PRESSED BUT NOTHING ELSE HAPPENS.	CHECK/REPLACE Q704 AND Q710 FOR SHORT OR LEAKY.
RCA	VLP900	N/A	INTERMITTENT KEY FUNCTIONS	CHECK C853
RCA	VLP900	N/A	NO TV/VCR LED - NO CHARGING OF BATTERY BUT VCR PORTION WORKS FINE	CHECK/REPLACE L701,L702,C719,C723,C713 AND Q710
RCA	VLP900	N/A	CAPSTAN WON'T STOP--AND UNIT IS STUCK IN SLP--AUDIO/VIDEO PLAY AND RECORD ARE BOTH GOOD IN SLP	CHECK IC801
RCA	VLP926	N/A	NO TV/VCR LED - NO CHARGING OF BATTERY BUT VCR PORTION WORKS FINE	CHECK/REPLACE L701,L702,C719,C723,C713 AND Q710
RCA	VLP927	N/A	NO TV/VCR LED - NO CHARGING OF BATTERY BUT VCR PORTION WORKS FINE	CHECK/REPLACE L701,L702,C719,C723,C713 AND Q710
RCA	VLP950	N/A	O.S.D MISSING	CHECK CONNECTIONS OF PIN 3 OF PG114 (MISSING VERT SYNC AT IC102 PIN 7)
RCA	VLP950	N/A	WIGGLY DISPLAY (OSD)	CHECK/REPLACE C902A
RCA	VLP950	N/A	WHEN PUSHING ANY REMOTE CONTROL BUTTON, CHANNEL GOES INTO A SEARCH MODE AND WILL NOT STOP UNTIL POWER IS TURNED OFF	CHECK/RESOLDER CONNECTIONS ON TIMER IC
RCA	VLT260	N/A	UNIT THINKS THAT A TAPE IS INSERTED	REPLACE BOTH TAPE END SENSORS
RCA	VLT260	N/A	AFTER EJECTING A TAPE, CARRIAGE WILL TRY TO LOAD AGAIN	CHECK/REPLACE Q142 TAKE-UP SENSOR (P/N# 161757)
RCA	VLT260	N/A	NO DISPLAY	DC-DC CONVERTER BAD-REPL. (2) OPEN 47uF CAPACITORS
RCA	VLT260	N/A	POWER SUPPLY BLOWS FUSES IMMEDIATELY-DIODES OK	CHECK C854 AND C860 SHORTED
RCA	VLT260	N/A	INTERFERRENCE IN VIDEO-ESPECIALLY HIGH CHANNELS	APPEARS TO BE RADIATION--REPL.(2) 47uF @ 50 (DC-DC)
RCA	VLT260	N/A	CAPSTAN SPEED IS OFF - TOO SLOW ON SP AND TOO FAST ON SLP	CHECK/REPLACE IC604 -CHECK PWM OUTPUT ON PIN#10 AND PIN#15 OF IC604 FOR PWM OUTPUT.
RCA	VLT260	N/A	DRUM MOTOR WON'T START INTERMITTENTLY	CHECK FOR COLD SOLDER CONNECTIONS ON D617 AND D618
RCA	VLT260	N/A	CAPSTAN MOTOR WILL NOT RUN	CHECK/REPLACE R631 FOR OPEN - ALSO INSPECT THE CAPSTAN FLYWHEEL BEARINGS FOR LUBRICATION
RCA	VLT375	N/A	CAPSTAN SPEED IS OFF - TOO SLOW ON SP AND TOO FAST ON SLP	CHECK/REPLACE IC604 -CHECK PWM OUTPUT ON PIN#10 AND PIN#15 OF IC604 FOR PWM OUTPUT.
RCA	VLT375	N/A	POWER SUPPLY BLOWS FUSES IMMEDIATELY-DIODES OK	CHECK C854 AND C860 SHORTED
RCA	VLT375	N/A	DRUM MOTOR WON'T START INTERMITTENTLY	CHECK FOR COLD SOLDER CONNECTIONS ON D617 AND D618
RCA	VLT375	N/A	CAPSTAN MOTOR WILL NOT RUN	CHECK/REPLACE R631 FOR OPEN - ALSO INSPECT THE CAPSTAN FLYWHEEL BEARINGS FOR LUBRICATION
RCA	VLT385	N/A	AFTER EJECTING A TAPE, CARRIAGE WILL TRY TO LOAD AGAIN	CHECK/REPLACE Q142 TAKE-UP SENSOR (P/N# 161757)
RCA	VLT385	N/A	NO DISPLAY	DC-DC CONVERTER BAD-REPL. (2) OPEN 47uF CAPACITORS
RCA	VLT385	N/A	CAPSTAN SPEED IS OFF - TOO SLOW ON SP AND TOO FAST ON SLP	CHECK/REPLACE IC604 -CHECK PWM OUTPUT ON PIN#10 AND PIN#15 OF IC604 FOR PWM OUTPUT.
RCA	VLT385	N/A	CAPSTAN MOTOR WILL NOT RUN	CHECK/REPLACE R631 FOR OPEN - ALSO INSPECT THE CAPSTAN FLYWHEEL BEARINGS FOR LUBRICATION
RCA	VLT385	N/A	UNIT THINKS THAT A TAPE IS INSERTED	REPLACE BOTH TAPE END SENSORS
RCA	VLT385	N/A	DRUM MOTOR WON'T START INTERMITTENTLY	CHECK FOR COLD SOLDER CONNECTIONS ON D617 AND D618
RCA	VLT385	N/A	INTERFERRENCE IN VIDEO-ESPECIALLY HIGH CHANNELS	APPEARS TO BE RADIATION--REPL.(2) 47uF @ 50 (DC-DC)
RCA	VLT385	N/A	POWER SUPPLY BLOWS FUSES IMMEDIATELY-DIODES OK	CHECK C854 AND C860 SHORTED
RCA	VLT390	N/A	NO DISPLAY	DC-DC CONVERTER BAD-REPL. (2) OPEN 47uF CAPACITORS
RCA	VLT390	N/A	UNIT THINKS THAT A TAPE IS INSERTED	REPLACE BOTH TAPE END SENSORS
RCA	VLT390	N/A	INTERFERRENCE IN VIDEO-ESPECIALLY HIGH CHANNELS	APPEARS TO BE RADIATION--REPL.(2) 47uF @ 50 (DC-DC)
RCA	VLT390	N/A	POWER SUPPLY BLOWS FUSES IMMEDIATELY-DIODES OK	CHECK C854 AND C860 SHORTED
RCA	VLT390	N/A	NO DISPLAY-ALL OTHER FUNCTIONS ARE OK	CHECK C805,C807 AND DC-DC CONVERTER,IP801
RCA	VLT395	N/A	CLOCK RUNS FAST--DISPLAY IS DIM	CHECK C807 & ZD804 FOR OPEN
RCA	VLT450	N/A	INTERMITTENT OPERATION OF DRUM MOTOR OR DRUM MOTOR WON'T START	CHECK/RESOLDER CONNECTIONS ON D617,D618 AND C610
RCA	VLT460	N/A	CAPSTAN MOTOR WILL NOT RUN	CHECK/REPLACE R631 FOR OPEN - ALSO INSPECT THE CAPSTAN FLYWHEEL BEARINGS FOR LUBRICATION
RCA	VLT460	N/A	AFTER EJECTING A TAPE, CARRIAGE WILL TRY TO LOAD AGAIN	CHECK/REPLACE Q142 TAKE-UP SENSOR (P/N# 161757)
RCA	VLT460	N/A	POWER SUPPLY BLOWS FUSES IMMEDIATELY-DIODES OK	CHECK C854 AND C860 SHORTED
RCA	VLT460	N/A	INTERFERRENCE IN VIDEO-ESPECIALLY HIGH CHANNELS	APPEARS TO BE RADIATION--REPL.(2) 47uF @ 50 (DC-DC)
RCA	VLT460	N/A	UNIT THINKS THAT A TAPE IS INSERTED	REPLACE BOTH TAPE END SENSORS
RCA	VLT460	N/A	DRUM MOTOR WON'T START INTERMITTENTLY	CHECK FOR COLD SOLDER CONNECTIONS ON D617 AND D618
RCA	VLT460	N/A	CAPSTAN SPEED IS OFF - TOO SLOW ON SP AND TOO FAST ON SLP	CHECK/REPLACE IC604 -CHECK PWM OUTPUT ON PIN#10 AND PIN#15 OF IC604 FOR PWM OUTPUT.
RCA	VLT460	N/A	NO DISPLAY	DC-DC CONVERTER BAD-REPL. (2) OPEN 47uF CAPACITORS
RCA	VLT470	N/A	AFTER EJECTING A TAPE, CARRIAGE WILL TRY TO LOAD AGAIN	CHECK/REPLACE Q142 TAKE-UP SENSOR (P/N# 161757)
RCA	VLT470	N/A	UNIT THINKS THAT A TAPE IS INSERTED	REPLACE BOTH TAPE END SENSORS
RCA	VLT470	N/A	CAPSTAN SPEED IS OFF - TOO SLOW ON SP AND TOO FAST ON SLP	CHECK/REPLACE IC604 -CHECK PWM OUTPUT ON PIN#10 AND PIN#15 OF IC604 FOR PWM OUTPUT.
RCA	VLT470	N/A	CAPSTAN MOTOR WILL NOT RUN	CHECK/REPLACE R631 FOR OPEN - ALSO INSPECT THE CAPSTAN FLYWHEEL BEARINGS FOR LUBRICATION
RCA	VLT470	N/A	DRUM MOTOR WON'T START INTERMITTENTLY	CHECK FOR COLD SOLDER CONNECTIONS ON D617 AND D618
RCA	VLT470	N/A	INTERFERRENCE IN VIDEO-ESPECIALLY HIGH CHANNELS	APPEARS TO BE RADIATION--REPL.(2) 47uF @ 50 (DC-DC)
RCA	VLT470	N/A	POWER SUPPLY BLOWS FUSES IMMEDIATELY-DIODES OK	CHECK C854 AND C860 SHORTED
RCA	VLT470	N/A	NO DISPLAY	DC-DC CONVERTER BAD-REPL. (2) OPEN 47uF CAPACITORS
RCA	VLT470	N/A	WILL NOT TUNE 5,6,7,8,9 BUT WOULD TUNE ALL OTHER CHANNELS	CHECK IC151
RCA	VLT600	N/A	NO CLOCK DISPLAY	CHECK/REPLACE L802,C803,C806,C807,C805 AND L801
RCA	VLT600	N/A	BLOWS F853 IMMEDIATELY OR NO DISPLAY	CHECK/REPLACE L802,C803,C805,C806 AND C807
RCA	VLT601	N/A	NO CLOCK DISPLAY	CHECK/REPLACE L802,C803,C806,C807,C805 AND L801
RCA	VLT650	N/A	NOT TRACKING	CHECK/REPLACE C618 (100uF @ 10v)
RCA	VMT285	N/A	PLAYS VERY FAST-LOOKS LIKE NO SPEED SELECT	PINCH ROLLER DOESN'T COME IN CONTACT WITH THE CAPSTAN SHAFT--CHECK TAPE GUIDE TO THE RIGHT OF CAPSTAN.
RCA	VMT295	N/A	PLAYS VERY FAST-LOOKS LIKE NO SPEED SELECT	PINCH ROLLER DOESN'T COME IN CONTACT WITH THE CAPSTAN SHAFT--CHECK TAPE GUIDE TO THE RIGHT OF CAPSTAN.
RCA	VMT295	N/A	CAPSTAN WILL NOT RUN	CHECK R854 FOR OPEN AND CAPSTAN BELT TO SEE IF IT IS WRAPPED AROUND FLYWHEEL
RCA	VMT385	N/A	NO VIDEO IN PLAYBACK ONLY	CHECK L200 FOR OPEN
RCA	VMT385	N/A	PLAYS VERY FAST-LOOKS LIKE NO SPEED SELECT	PINCH ROLLER DOESN'T COME IN CONTACT WITH THE CAPSTAN SHAFT--CHECK TAPE GUIDE TO THE RIGHT OF CAPSTAN.
RCA	VMT389	N/A	PLAYS VERY FAST-LOOKS LIKE NO SPEED SELECT	PINCH ROLLER DOESN'T COME IN CONTACT WITH THE CAPSTAN SHAFT--CHECK TAPE GUIDE TO THE RIGHT OF CAPSTAN.

LAMSON Digital Electronics Address: 1324-1326 Jose Abad Santos Ave.,Manila, Philippines TEL:00632-2559675  TEL/FAX:00632-2568130 Cellular:0922-8867809 0922-8867810 E-mail:[email protected]    YAHOO MESSENGER ID : myrna_q_ng or saishu_ng SKYPE ID: myrna_q_ng or saishu_ng (old) Lamson Importers & Exporters Trading <We will not be using the old address and phone no. in the future. Please be noted when calling us, sending letters, parcels or buying our products> OLD Address: 681 Carmen Building, Ronquillo St. Quiapo, Manila, Philippines Phone:00632-7332936 7332940 Fax:00632-7332940 E-mail: